Category – Electrical – Batteries
ETX900-TSO-35-M20-KIT
What’s included:
- 1 x Panel mount LED (11MM12)
- 1 x Battery Box Spacer (211215)
- 1 x Fault Indicator Placard (200208)
- 1 x 3/8″ Tubing (5239K15)
- 3 x 1/4″ Tubing (5239K13)
- 1 x 3/8″ Wye Tube Fitting (5463K722)
- 1 x 3/8″ ID 9/16″ OD, 1/8″Grommets (9600K86)
- 1 x 3/8″ ID 9/16″ OD, 1/16″ Grommets (9600K316)
- 1 x Battery Cable (BA2-38-2)
ETX900-TSO-AVIAT-KIT
STC installation kit to be used with the ETX900-TSO
We are adding kits for many other make/models. Please check back regularly.
G35 Cessna Custom Molded Foam Insert
210608 G35 Piper Custom Molded Foam Insert
211215 G35 Mooney Custom Molded Foam Insert
ETX-QCC4 EarthX 48″ Quick Connect Cable
SPECIFICATIONS
- Max jump start amps: 400 amps
- Length: Battery “pigtail” cable = 48”/122 cm
- Jump pack adapter cable: 12”/30 cm
- 1/4″ / M6 ringlets
- Industry standard 2-pole SAE connector, with rubber sealing cap.
- Cable max. rating: 400 Amp
When not in use, keep rubber sealing cap closed on the SAE connector end.
You can then use this pigtail to charge your battery or for jump starting.
If the cables get hot, disconnect and allow them to cool down before use.
Caution: Never use the supplied battery chargers pigtail cables that comes with your charger for jump starting as they are not designed to carry this amount of amperage. Only use the EarthX quick connect (model# ETX-QCC4) cables to jump the battery.
3-Pin 12-28V Aircraft External Power Plug Quick Connect Cable
TAC (SAE 586 Tall Brass Adapters For 6mm Ring Lugs)
TAA (SAE Terminal Adapter 3/8″ Ring Lugs)
Adapter-CDE (Terminal Adapters Designed For C, D, And E Cases)
This terminal adapter kit comes with 2 brackets and 2 screws for the positive and negative posts with the standard size of 6mm and makes for an easy installation when your motor sports vehicle requires a side or front mounted battery cable versus top mounting. Fits all C, D, and E cases.
Comes included with the following batteries: ETX24C, ETX36C, and ETX36D, ETZ14C.
5MM12 12V LED Indicator Light
5MM24 24V LED Indicator Light
11MM24 24V Military Grade LED Indicator Light (Dimmable And Push-To-Test)
BB-CU Custom Light Weight Battery Box For “E” Case
This custom designed battery box will fit your battery like a glove and is super easy to install. Designed aluminum battery box for the ETX680/ETX900/ETX900-VNT/ETX1200. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .2Kg or 7.2oz. This unique design allows for simple, easy installation with the dimensions: 6.5″ L x 3.1″ W x 6.6″ H.
BB-TH Thermal Battery Box “E” Case
Thermal battery box to protect from radiated or convection heat. Fits the “E” case batteries including ETX680/ETX900/ETX900-VNT/ETX1200. Designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. The hold-down tab comes with a mounting fixture that can hold a cooling air duct up to 1” in diameter. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .49Kg or 1 Lb. 1.2oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140°F ( 60ºC) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113ºF or 45ºC.
BB-TH-CO Thermal Battery Box “C” Case
Thermal battery box to protect from radiated or convection heat. Compatible with our existing “C” case battery models; ETX680C.
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .375Kg or 13.2oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140 deg F ( 60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
