Category – Electrical – Battery Accessories
Rechargeable Battery for EKP V
3/8″ Vent Tubing
Tubing for the EarthX ETX680-24-VNT or the ETX680-24-TSO vented batteries. Only EarthX approved or supplied tubing should be used. The tubing is chemical resistant and rated for 500°F. Be careful not to crush or restrict flow through the tubing. Enter the quantity you want in feet.
3/8″ inside diameter, 7/16″ outside diameter
Stratus Battery Replacement Kit
BB-U Light Weight Aluminum Battery Box For “U” Case
This is a custom fit designed battery box for the ETX1600, the ETX900-24, or the ETX680-24-VNT battery. This battery box has a removable hold down bracket which allows the battery to be removed from the top or the front for easy installation and use. It is made of aluminum weighing only .325Kg or 11.5oz, yet can handle 9Gs force downward and 6Gs upward.
What’s included:
- 1 x battery box
- 1 x top front removable hold down tab
- 2 x screws for hold down
811B Battery
ETX900-TSO-35-PA-KIT
STC installation kit to be used with the ETX900-TSO. Use for replacing a Concorde or Gill 35 Ah battery.
We are adding kits for many other make/models. Please check back regularly.
Select options
This product has multiple variants. The options may be chosen on the product page
Optimate TM-281 5amp Battery Charger/Maintainer/Power Supply (24-28V Batteries)
The Optimate TM-281 is designed for 24-28V Lithium batteries. This will charge and maintain your lithium battery with 5 amps of energy. This lithium charger also has a “tune” or power source mode of delivering 4 continuous amps of energy so you can program your EFIS or retune your car plus a pushbutton activated BMS “wake up” mode to safely wake up a battery out of sleep mode.
Features:
- Lithium Battery Charger
- Lithium Battery Maintainer
- Power Supply (press TUNE button)
BB-TH-U Thermal Battery Box “U” Case
Thermal battery box to protect from radiated or convection heat. This battery box is designed to be compatible with our existing “U” case battery models; ETX1600, ETX900-24, ETX680-24-VNT.
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. Weight is .68Kg or 1 Lb. 8oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140 deg F (60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
11MM12 12V Military Grade LED Indicator Light (Dimmable And Push-To-Test)
ETX-JMP12/24 12V-24V Jump Pack (All-In-One)
This is a 12V/24V jump pack that can boost just about anything! Very compact and the entire kit is only 4 pounds. This jump pack uses the technology of lithium iron phosphate (LiFePo4) chemistry, not Lithium Cobalt (LiCoO2). LiFePo4 is the most powerful, safest and most robust of all the lithium chemistries, plus double the life span of lithium cobalt packs.
Examples of what it can jump start: automobiles, diesel trucks, motorcycles, boats, construction equipment, experimental and certified aircraft, tractors, snowmobiles, ATV/UTVs, riding lawnmowers, and so much more.
282-101 Battery Tester / Charger
Airframe Interface Kit for 28V Certified Aircraft (BM-AIK2A)
Kit to adapt aviation-specific BatteryMINDers for use with FAA-certified aircraft. Compatible with original, and current CEC2 series BatteryMINDer chargers (8A or less*).
Key Features:
|
|
AC Power Input Cable (801-468)
IBBS AC plug-in charger
AC plug-in charger (IBBS-12v-Charger-II-LiFe)
A Ground based charger for the IBBS-12V-3AH & IBBS-12V-6AH models. The AC plug-in charger provides convenient way to fast charge the IBBS system. It is great for winter storage of the IBBS system and ground recharging anytime. 100-240 VAC input, IBBS compatible dsub connector on output.
AC plug-in charger (IBBS-24v-Charger-II-LiFe)
A Ground based charger for the IBBS-24-amp model only. The AC plug-in charger provides convenient way to fast charge the IBBS system. It is great for winter storage of the IBBS system and ground recharging anytime. 100-240 VAC input, IBBS compatible dsub connector on output.
Select options
This product has multiple variants. The options may be chosen on the product page
