Category – Electrical – Battery Accessories
BB-CU Custom Light Weight Battery Box For “E” Case
This custom designed battery box will fit your battery like a glove and is super easy to install. Designed aluminum battery box for the ETX680/ETX900/ETX900-VNT/ETX1200. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .2Kg or 7.2oz. This unique design allows for simple, easy installation with the dimensions: 6.5″ L x 3.1″ W x 6.6″ H.
BB-CO Light Weight Battery Box For “C” Case
This is a custom designed aluminum battery box designed specifically for the EarthX lithium battery ETX680C or any of the “C” cased batteries (ETX24C, ETX36C). This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .15Kg or 5.3oz and will fit your battery like a glove. This unique design allows for simple, easy installation with the dimensions: 5.9″ L x 3.4″ W x 4.5″H.
BB-TH Thermal Battery Box “E” Case
Thermal battery box to protect from radiated or convection heat. Fits the “E” case batteries including ETX680/ETX900/ETX900-VNT/ETX1200. Designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. The hold-down tab comes with a mounting fixture that can hold a cooling air duct up to 1” in diameter. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .49Kg or 1 Lb. 1.2oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140°F ( 60ºC) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113ºF or 45ºC.
BB-TH-CO Thermal Battery Box “C” Case
Thermal battery box to protect from radiated or convection heat. Compatible with our existing “C” case battery models; ETX680C.
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .375Kg or 13.2oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140 deg F ( 60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
BB-MU Light Weight Battery Box Fit “E” Case And PC680
The light weight aluminum battery box is excellent to use with the EarthX lithium batteries for easy installation. This battery box can be used interchangeably for the EarthX Lithium Battery models ETX680/900/900-VNT/1200 or the Odyssey PC680 with the use of a foam spacers. We call it the multi-use battery box for this reason.
If you are using the battery box for the EarthX Lithium batteries, you will use a foam spacer on the left and right side of the battery for a snug fit. If you are using the battery box for the PC680, you will use the foam spacer on the backside at the bottom of the case to adjust for the tapering of the case for a snug fit.
This battery box was engineered to be strong enough to withstand 30 G of force for the EarthX Lithium Batteries or 15 G of force for the PC680 yet only weighs .275Kg or 10oz. This unique design allows for simple, easy installation with the dimensions: 7.1″ L x 3.1″ W x 6.5-6.6″ (adjustable)H or (180mm x 80mm 166-168mm).
What’s included:
- 1 x battery box
- 1 x top front hold down
- 2 x screws for hold down
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
1/4″ Vent Tubing
Tubing for the EarthX ETX900-VNT or the ETX900-TSO vented batteries. Only EarthX approved or supplied tubing should be used. The tubing is chemical resistant and rated for 500°F. Be careful not to crush or restrict flow through the tubing. Enter the quantity you want in feet.
1/4″ inside diameter, 5/16″ outside diameter
Indicator Placard
Optimate TM-391 6amp Battery Charger/Maintainer (12-13.2V Batteries)
The Optimate TM-391 Lithium 6 amp charger that can be used as a charger, maintainer, or as a power supply for your lithium battery with 6 amps of energy. (The power supply mode will give you 5 amps at a constant 13.6V)
What’s included:
- 1 x TM-391 charger/maintainer/power supply
- 1 x battery alligator clips
- 1 x waterproof quick connect lead with ringlets and SAE connector
Optimate TM-522-D4 40W (3amp) Solar Battery Charger/Maintainer (12-13.2V Batteries)
Optimate TM-275 9.5amp Battery Charger/Maintainer/Power Supply (12-13.2V Batteries)
This Optimate Plug in the Wall Lithium charger will quickly charge your battery at 9.5 amps, maintain it at the optimal voltage, and can be used as a power source of 5 continuous amps! For example, you can use it as power supply while programming your aircraft EFIS so you are not draining your battery while you work.
Features:
- CHARGER
- MAINTAINER
- POWER SUPPLY (press TUNE Button)
- 1 x TM-275 charger/maintainer/power supply
- 1 x battery alligator clips
- 1 x waterproof quick connect lead with ringlets and SAE connector
100166 Ground Power Unit Accessory
