Electrical
AIS-360 ARINC BUFFER/HS to HS/LS to LS
The AIS 360 ARINC Buffer/Isolator (833610-02) has two ARINC 429 inputs and two output channels. Labels received on the ARINC 429 low speed input are sent out on the low speed output; and labels received on the ARINC 429 high speed input are sent out on the ARINC 429 high speed output. The AIS 360 digital platform will convert or combine almost any type of digital avionics signal.
Fuel Flow Transducer | 7-90 GPH, Hall Effect, Straight Pick-up
Fuel Flow Transducer | 7-90 GPH, Hall Effect, Right Angle Pick-up
SR 623 Switching Relay | Six Two-Pole Relays
Standard Multi-Circuit Toggle Switch | 6 pole, On-None-On + False
AIS 240B-35 Switching Module | 28VDC, For MARC 35 + False
The AIS240A-35 is a multi-purpose switching unit, consisting of six, four pole relays for a total of 24 poles of switching capabilities. The relays are arranged in a group of four (16 poles) and two single relays (4 poles each). The relays can be activated by either a ground or 28 Vdc, maximizing installation flexibility. The AIS240A-35 uses gold plated dry contacts that are sealed in nitrogen filled cases.The rugged construction makes them ideal switching units for both fixed wing and helicopter operations.
SR64-1 Switching Relay Module | MARC 70, 24 Pole
The SR 64 provides 24 poles of switching through six, hermetically sealed, bifurcated relays. The relays contacts are gold plated and have a 2 amp resistive load rating at 28 VDC. Coil current is 120 mA. K1, K2, K3 and K4 are switched simultaneously through coil pins, 71 and 72. K5 and K6 are independently switched through their coil pins.
SR 54 Switching Module | 20 Pole
The SR 54 switching relay provides 20 poles of switching through five hermetically sealed, bifurcated relays. The SR 54 has a built-in circuit that switches all relays to their de-energized condition whenever K6 is activated. This can be used for such applications as insuring LOC is presented on the HSI whenever a LOC signal is selected.
AIS 200B-35 20 Pole Switching Module
The AIS 200B-35 is a 20-pole, signal level, switching unit designed for use with NAV systems that share the aircrafts HSI/CDIs OBS functions. The contact switching rating is limited by the circuit board track current capacity to 1.0 amp. This unit has a revisionary relay which selects the LOC signal for display on the HSI/CDI whenever a LOC channel is selected in the NAV unit. This unit uses 10 relays in a series/parallel arrangement to provide the same 20 poles of switching. While model AIS 200B-35 is a direct fit and replacement for the AIS 200-35 and AIS 200A-35 models, installation of this AIS 200B-35 remains the same. Operates on 28 VDC.
12 Pole Switching Module
Intelligent Lighting Controller
Intelligent Lighting Controller (ILC) is an electronic control system specifically designed for switching and dimming lighting loads in experimental aircraft. ILC provides independent switching of four (4) lighting circuits which may be used to control landing lights, taxi lights, strobe lights and navigation lights.  The lighting loads can be any combination of incandescent, LED, or HID. Additionally, ILC includes three (3) independently controlled dimming circuits which may be used to control incandescent or LED instrument and cockpit/cabin lights.  ILC includes a switching panel and remote power control module.
Model:
- Intelligent Lighting Controller (ILC-4CH)
Rolls-Royce 250-C300 Fuel Flow Transducer Installation Kit | Robinson R66
RemoteFlo Fuel Flow Transducer Installation Kit | Robinson R66
Intelligent Power Stabilizer
Intelligent Power Stabilizer (IPS) is an electronic power converter that provides stable power to critical electrical equipment found in general aviation aircraft.  Electronic equipment such as engine monitors, EFIS and GPS’s can be operational before and during engine starting. With this important feature, the IPS saves fuel and operating expenses by not having to run the engine during flight plan loading or clearance delivery. When used with aircraft engine monitors, it ensures the pilot can monitor critical engine operating parameters such as oil pressure during the engine starting process. The IPS is available in three different models and is suitable for use with equipment such as the Garmin GNS-430/530 series of GPS and the G900X and GU370/375 series avionic system.
Models:
- Intelligent Power Stabilizer, 12 volt, 4 amp (IPS-12V-4A)
- Intelligent Power Stabilizer, 12 volt, 8 amp (IPS-12V-8A)
- Intelligent Power Stabilizer, 24 volt, 5 amp (IPS-24V-5A)
Select options
This product has multiple variants. The options may be chosen on the product page
CONVERTER CABLE/4 PIN PROBE
CC250 dual secondary 400Hz Transformer
7274-67 Series Circuit Breaker | 20 Amp Rating
Klixon® 7274-67 series circuit breakers are small, lightweight, and low amperage devices specifically designed to protect aircraft and aerospace cables, and components. The 7274 features a trip–free, indicating reset button and is available in standard ratings from 1/2 to 20 amps.
Includes hardware.
Noise Eliminator Filter | 10 Amp, Wide Attenuation
This DC eliminator filter is FAA-PMA approved solution for reducing interference from alternators, strobe and rotating beacons, AC HVAC, DC motors, electronic fuel pumps and any other electrical components prone to produce noise. This device also protects on-board aircraft electronics from power surges and spikes.
FAA-PMA Magneto Noise Filter
This magneto noise filter will suppress EMI-RFI (popping) noise with our FAA-PMA approved ignition noise filter. It easily connects to the primary P-Lead and grounds at the magneto metal twist cap and magneto body.  The Magneto Filter is a feed through design with self healing film capacitor technology that greatly increases the ability to filter and extends the reliability of the filter.
Plastic Converter Connector Kit with Solder Cup | 5 Pin, 10 A
This Plastic Converter Connector Kit with Solder Cup is a plastic connector hood with a back-shell, 4-40 hardware and 25 Pin d-sub and 5 high current (10 Amp) pins. Designed for the LS03-05003 converter line the kit is a ruggedized connector back-shell that will protect the dc converter, db connector and pins from airborne harsh environments.
