Integrated Battery Back-up System (IBBS)
The Integrated Battery Back-up System (IBBS) provides an engineered solution to enable an endurance bus for critical loads found in aircraft. The IBBS system provides back-up power to critical electronic loads such as EFIS, GPS, Autopilots, and engine monitoring systems.
IBBS is available in 6 different models, including three FAA Certified models. Installation parts and accessories are available to complete your installation, such as a dsub connector or full installation kit, through the Accessories tab or by choosing from the model list below.
Select options
This product has multiple variants. The options may be chosen on the product page
Intelligent Power Stabilizer
Intelligent Power Stabilizer (IPS) is an electronic power converter that provides stable power to critical electrical equipment found in general aviation aircraft. Electronic equipment such as engine monitors, EFIS and GPS’s can be operational before and during engine starting. With this important feature, the IPS saves fuel and operating expenses by not having to run the engine during flight plan loading or clearance delivery. When used with aircraft engine monitors, it ensures the pilot can monitor critical engine operating parameters such as oil pressure during the engine starting process. The IPS is available in three different models and is suitable for use with equipment such as the Garmin GNS-430/530 series of GPS and the G900X and GU370/375 series avionic system.
Models:
- Intelligent Power Stabilizer, 12 volt, 4 amp (IPS-12V-4A)
- Intelligent Power Stabilizer, 12 volt, 8 amp (IPS-12V-8A)
- Intelligent Power Stabilizer, 24 volt, 5 amp (IPS-24V-5A)
Select options
This product has multiple variants. The options may be chosen on the product page
Intelligent Lighting Controller
Intelligent Lighting Controller (ILC) is an electronic control system specifically designed for switching and dimming lighting loads in experimental aircraft. ILC provides independent switching of four (4) lighting circuits which may be used to control landing lights, taxi lights, strobe lights and navigation lights. The lighting loads can be any combination of incandescent, LED, or HID. Additionally, ILC includes three (3) independently controlled dimming circuits which may be used to control incandescent or LED instrument and cockpit/cabin lights. ILC includes a switching panel and remote power control module.
Model:
- Intelligent Lighting Controller (ILC-4CH)
Safety-Trim Intelligent Servo Controller
Designed for standard electric trim servos, the Safety-Trim Intelligent Servo Controller (Safety-Trim) is an electronic speed control system for experimental aircraft. Safety-Trim provides the directional switching function as well as the adjustable speed control function needed to drive electric trim motors with a time limited operation of the trim servo motors that reduce the possibility of run-away trim and failure to operate conditions. Safety-Trim is an important safety feature that is short circuit proof and reverse polarity protected.
Models are available in single or dual axis controllers, 2 speed presets for high and low speed trim actuation that allow separately adjustable trim speeds for different flight configurations. Safety-Trim is also available in a single axis heavy-duty model for DC trim motors and linear actuators rated for operation at 12 volts and up to 10 amp.
Select options
This product has multiple variants. The options may be chosen on the product page
Control Valve Servo Kit
Control Valve Servo Kit (CVS) is a system for controlling valves and dampers and is ideal for heater flapper doors, oil cooler control, alternate air door, and ventilation dampers. The CVS kit includes an instrument panel mounted controller, linear actuator servo and a pre-made 5-foot wiring harness.
CVS is available in four different models: 12-volt standard (30 mm travel linear actuator servo), 12-volt heavy-duty (50 mm travel linear actuator servo), 24-volt standard (30 mm travel linear actuator servo) and 24-volt heavy-duty (50 mm travel linear actuator servo).
Select options
This product has multiple variants. The options may be chosen on the product page
Intelligent Flap Controller
Intelligent Flap Controller (IFC) is an electronic controller designed specifically to operate DC motor actuators, particularly the Van’s Aircraft series of Flap Actuators used in RV type experimental aircraft. IFC provides flap positioning presets that are accessed by a quick tap of the flap switch. IFC is very simple to wire and requires NO flap position sensor. It is fully compatible with Safety-Trim servo controllers.
Model:
- Intelligent Flap Controller (IFC-10)
CERTIFIED 24V IBBS Install Kit w/ STC Authorization Letter
CERTIFIED 12V IBBS Install Kit w/ STC Authorization Letter
IBBS Replacement Batteries (3ah and 6ah)
LiFe battery pack replacement for the Integrated Battery Back-up System. IBBS replacement batteries are available for all Experimental and Certified IBBS models.
Select options
This product has multiple variants. The options may be chosen on the product page
CERTIFIED 24V IBBS Install Kit w/ STC Authorization Letter
CERTIFIED 12V IBBS Install Kit w/ STC Authorization Letter
SmartStart
SmartStart (SS-12v) is an electronic control module that controls the operation of the engine starter system. SmartStart improves the safety and security of push-button or key-switch starting systems by providing an interlocked and time limited operation of the engine starter. The SmartStart system helps avoid unintentional activation of the engine starting system.
A SmartStart Kit is available, which includes one SmartStart control module, 8 ft. wiring harness, and airspeed switch.
Models:
- SmartStart (SS-12V)
- SmartStart Kit (includes Airspeed switch and wiring harness) (SS-12V-KIT)
Select options
This product has multiple variants. The options may be chosen on the product page
