Universal Switch-Airspeed Kit
The Universal Switch – Airspeed Kit (USW-1) allows the control of electrical loads based on airspeed, at either below or above an airspeed set point. The kit includes an ASW-1 airspeed switch and a Universal Switch-SPDT controller. This combination of components allows for the switching of electrical loads up to 10 amps and up to 30 volts based on aircraft speed.
Models:
- Universal Switch – Airspeed Kit (USW-1)
TC90 Installation Kit (control head only)
M113-3/8 CHT Gasket Probe
CHT Gasket Probe
The Cylinder Head Temperature (CHT) – Gasket Type (Washer) – You may install the probe on the upper or lower spark plug (the one that provides the best correlation with the other temperature probe). Due to the sparkplug location, the gasket probe may read 25’F higher (generally the sparkplug is the hottest part of the cylinder, which will cause this discrepancy).
- 1 Thermocouple Type K CHT Gasket Probe
EGT Probe PN-M111
CHT Bayonet Probe
The Cylinder Head Temperature (CHT) – standard Bayonet – probe, has a captive 3/8-24 boss which is screwed into the base of the cylinder. The CHT port is predrilled by your engine manufacturer. The CHT probe has a screwdriver slot to facilitate tightening.
- 1 Thermocouple Type K CHT Bayonet Probe
