Camera Divider Kit

This Camera Divider Kit turns any CS4 or CS5 into a versatile Camera module.

It’s designed to take advantage of the “top-access” feature of either the CS4 or CS5 and let you store your camera body at the top so you can open the top flap and pull your camera right out.

Then, if you need access to the lenses or other gear stored in the other cells down below, you can open up the side zippers of the Center Section and open up the entire module.

The Vertical Outer Walls have velcro to allow the kit to be attached to the inner surface of the CS4 or CS5.
What’s Included:

2 Vertical Dividers – each one 7.5″ x 3.75″
5 Short Dividers – (horizontal) – each one 2.5″ x 3.75″
3 Shorter Dividers – (horizontal) – each one 2.0″ x 3.75″
2 Vertical Outer Wall – each one 12.25″ x 3.75″
2 Horizontal Outer Wall – each one 8.75″ x 3.75″
2 Medium Risers – each one 1.25″ x 3.75″
2 Tall Risers – each one 2.5″ x 3.75″
4 Velcro Strips – used to attach the Risers to the bottom of the Vertical Dividers.

In order to allow you to make use of the “Sunglasses” pocket on the top of the CS4 or CS5, you can shift the whole set of dividers downward (by removing the Risers or by using the Medium Risers) and move the topmost Horizontal Outer Wall downward to make room for the contents of the “Sunglasses” pocket.