DC One-XP Aviation Headset | Bluetooth, Hybrid ENC, 6 Pin Plug
$1,259.25
The DC One-XP headset features the perfect combination of comfort, technology, and durability. Built-in Bluetooth allows cellphones, MP3 players, tablets, or other personal devices to seamlessly integrate into the headset. The headpad is constructed of soft Outlast fabric that absorbs heat buildup and keep users cool during long flights. Plush leatherette ear seals with memory foam deliver excellent noise attenuation and comfort. A fully adjustable suspension assembly is integrated into the headband for a personal fit. Swivel hinge stirrups disperse clamping pressure allowing the headset to conform to the wearers head. Hybrid ENC technology provides active noise reduction (ANR) with feed-forward/feed-back technology, and an external microphone on the dome to pick up outside noise for superior noise attenuation.
Features
- The DC ONE-XP has a 6-pin connector for plugging into the aircraft panel to power the Electronic Noise Cancelling
- Bluetooth wireless technology seamlessly integrates cellphones, MP3 players, tablets, or other personal devices
- Compact in-line control module with backlit touch-key user interface
- Hybrid Electronic Noise Cancellation provides best-in-class active noise cancellation
- Fail-safe operation ensures full communication in the event of battery loss or system failure
- Digital signal processing (DSP) provides high fidelity audio
- High performance, electret microphone with enhanced noise cancelling
- Rugged lightweight alloy headband and suspension system is adjustable for personalized fit
- Over-the-ear leatherette recovery foam seals cradle and comfort for a snug, secure fit
- Low profile, Outlast® fabric head pad with vented design absorbs excess heat
- Audio mute reduces auxiliary audio volume to prevent missed communications
- Stereo/Mono selection is compatible with all aircraft audio panels
- Collapsible, folding design for compact storage in included David Clark headset bag
- TSO C-139a approval
Specifications
Weight w/o cable:
12.3 oz. (349 g)
Ear coupling:
Around-the-ear (Circumaural)
Hardware:
Lightweight Alloy
Connector Type:
6-PIN
Connection Cable:
0.155” (4-mm) OD shielded cable, length ~ 6 ft. (1.8 m)
Battery life:
Up to 50 hours (2 AA batteries)
Operating temperature:
-20°C to +70°C
Operating voltage:
3VDC (2x AA)
Dome type:
ABS
Characteristic SPL:
95 dB SPL (1 kHz, 1 mW) @ maximum volume nominal
Contact pressure:
1.4 lb. (6.2 N)
ENC peak attenuation:
30dB @ 150Hz
ENC attenuation range:
20Hz―1KHz
Total harmonic distortion (THD):
< 1% – 110 dB SPL (300 – 3,000 Hz)
Ear Transducer principle:
Dynamic
Ear Impedance:
150 Ω mono / 300 Ω stereo (each ear)
Ear Frequency Response:
12 – 15,000 Hz
Microphone principle:
Pre-polarized condenser microphone (electret), noise cancelling
Mic Impedance:
150Ω nominal
Mic Sensitivity:
400mV+/-6dB into 150Ω load @ 1kHz for 114 dB SPL input
Mic Freq Response:
150 – 8,000 Hz
Mic DC Supply V:
8-16V, not polarity sensitive
Source Resistance:
470Ω
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | David Clark Company |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
D2 • Rotor
The D2•Rotor combines a CS2 as the slimmest possible module for drones, along with the Pack Cap Rear to allow the bag to be configured as a backpack for those times when you need to fly and be on the move at the same time, and of course, the Pocket Cap Front to contain and organize all the inevitable small stuff.
NOTE: This price DOES NOT INCLUDE THE MAVIC MINI FOAM. This bag is configured with no foam, so you'll have to add the Drone Foam for the Mavic Mini yourself.
Pocket Cap Rear
The FLEX POCKET CAP REAR is exactly the same as the POCKET CAP FRONT, except it's the "opposite": This module goes onto the Rear surface of any other FLEX module (not the Front).
Now you can have lots of small pockets on the REAR of your bag, to go along with all the small pockets you already have on the Front.
Flat Cap Rear
The FLAT CAP REAR zips onto the Rear surface of all FLEX Center Sections and also directly onto a Front End Cap (PCF, FCF).
This module offers two thin pockets on the outer surface and also a thin half-height flap pocket on the inner surface. The convertible panel on the back gives you the ability to slide your BrightLine Bag onto the telescoping handles of a rolling suitcase or folding cart.
Reviews
There are no reviews yet.