DC PRO-2 Aviation Headset | Dual Ear, Dual Plug, Passive
$615.00
The DC PRO-2 passive noise-attenuating headset combines outstanding comfort, performance and durability in a lightweight, rest-on-ear design. These headsets are ideal for commercial pilots that fly low-noise aircraft where Electronic Noise Cancelling ANR technology is not required. DC PRO-2 headsets provide enhanced audio quality and clear, crisp voice transmission utilizing advanced, noise-cancelling electret microphones.
Features
- Enhanced audio performance and M-5B electret noise-cancelling microphone for clear voice transmission
- Soft, Outlast® technology, heat absorbing head pad keeps you cool and comfortable in flight
- Superior passive noise attenuation for a rest-on-ear style headset
- Plush, rest-on-ear (supra aural), leatherette ear seals reduce heat buildup
- Rugged, yet lightweight alloy suspension, less than 8 ounces
- Swivel hinge stirrup dramatically dissipates clamping pressure
- FAA TSO-C139a Approved
Specifications
Weight w/o cable:
8.4 oz. (238 g)
Ear coupling:
On-the-ear
Hardware:
Lightweight Alloy
Connector Type:
Standard dual GA plugs
Connection Cable:
0.130” (3.3 mm) O.D. shielded cable, length ~ 5 ft. (1.5 m)
Operating temperature:
-20°C to +55°C
Microphone DC supply voltage:
8–16 Volts, not polarity sensitive
Dome type:
ABS
Characteristic SPL:
91 dB SPL (1 kHz, 1 mW) @ maximum volume nominal
Contact pressure:
0.6 lb. (2.7 N)
Total harmonic distortion (THD):
< 1% – 110 dB SPL (300 – 3,000 Hz)
Ear Transducer principle:
Dynamic
Ear Impedance:
600 Ω mono / 1200 Ω stereo (each ear)
Ear Freq Response:
100 – 15,000 Hz
Microphone principle:
Pre-polarized condenser microphone (electret), noise cancelling
Mic Impedance:
150Ω nominal
Mic Sensitivity:
400mV+/-6dB into 150Ω load @ 1kHz for 114 dB SPL input
Mic Freq Response:
150 – 8,000 Hz
Source Resistance:
470Ω
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | David Clark Company |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
D3 • Hover
The D3•Hover combines a CS3 as a wonderfully slim module for drones, along with the Pack Cap Rear to allow the bag to be configured as a backpack for those times when you need to fly and be on the move at the same time, and of course, the Pocket Cap Front for all the small stuff.
NOTE: This price DOES NOT INCLUDE ANY FOAM. This bag is configured with no foam, so you'll have to add either the Drone Foam for the DJI Spark, or the Drone Foam for the DJI Mavic Air, since these are the two foam sets designed to fit inside the CS3.
Pocket Cap Rear
The FLEX POCKET CAP REAR is exactly the same as the POCKET CAP FRONT, except it's the "opposite": This module goes onto the Rear surface of any other FLEX module (not the Front).
Now you can have lots of small pockets on the REAR of your bag, to go along with all the small pockets you already have on the Front.
Reviews
There are no reviews yet.