DC PRO-X2 Aviation Headset | Dual Ear, ENC, 5-Pin XLR, Aircraft PWR
Contact Cost Aero at 855-500-3044 for pricing
The DC PRO-X2 true crossover headset is ideal for both general aviation and commercial pilots that prefer the unmatched comfort of a lightweight, rest-on-ear design. The next generation DC PRO-X2 Series retains all the comfort and performance features of the original, pilot-acclaimed DC PRO-X headsets; now with enhanced ANR and audio performance. A fully adjustable suspension assembly is integrated into the headband for a personal fit. Swivel hinge stirrups disperse clamping pressure, allowing the headset to conform to the users head. Hybrid ENC technology provides active noise reduction (ANR) with feed-forward/feed-back technology, and an external microphone on the dome picks up outside noise for superior noise attenuation.
Version is a dual ear ENC headset with M-5B electret microphone, aircraft power, and a 5-pin XLR plug.
Features
- Enhanced Auto-Shutoff feature virtually eliminates accidental loss of battery power
- Automatic Gain Control (AGC) for optimum ANR performance in changing, high noise conditions
- Soft, Outlast® technology, heat absorbing head pad keeps cool and comfortable in flight
- Hybrid ENC technology for excellent active noise reduction
- Plush, rest-on-ear (supra aural), leatherette ear seals reduce heat buildup
- Rugged, yet lightweight alloy suspension, less than 8 ounces
- Compact control module with intuitive, multi-function control pad
- FAA TSO-C139a Approved
Specifications
Weight w/o cable:
7.5 oz. (215 g)
Ear Coupling:
On-the-ear
Hardware:
Lightweight Alloy
Connector Type:
5-Pin
Connection Cable:
0.130” (3.3 mm) O.D. shielded cable, length ~ 5 ft. (1.5 m)
Battery Life:
Up to 50 hours (2 AA batteries)
Operating Temperature:
-20°C to +55°C
Operating Voltage:
3VDC (2x AA)
Dome Type:
ABS
Characteristic SPL:
91 dB SPL (1 kHz, 1 mW) @ maximum volume nominal
Contact Pressure:
0.6 lb. (2.7 N)
ENC Peak Attenuation:
30dB @ 150Hz
ENC Attenuation Range:
20Hz―1KHz
Total Harmonic Distortion (THD):
< 1% – 110 dB SPL (300 – 3,000 Hz)
Ear Transducer Principle:
Dynamic
Ear Impedance:
600 Ω mono / 1200 Ω stereo (each ear)
Ear Freq Response:
12 – 15,000 Hz
Microphone Principle:
Pre-polarized condenser microphone (electret), noise cancelling
Mic Impedance:
150Ω nominal
Mic Sensitivity:
400mV+/-6dB into 150Ω load @ 1kHz for 114 dB SPL input
Mic Freq Response:
150 – 8,000 Hz
Mic DC Supply V:
8-16V, not polarity sensitive
Source Resistance:
470Ω
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | Faro |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
D3 • Hover
The D3•Hover combines a CS3 as a wonderfully slim module for drones, along with the Pack Cap Rear to allow the bag to be configured as a backpack for those times when you need to fly and be on the move at the same time, and of course, the Pocket Cap Front for all the small stuff.
NOTE: This price DOES NOT INCLUDE ANY FOAM. This bag is configured with no foam, so you'll have to add either the Drone Foam for the DJI Spark, or the Drone Foam for the DJI Mavic Air, since these are the two foam sets designed to fit inside the CS3.
Reviews
There are no reviews yet.