• Pre-Wired Harness for all functions • New Display SVGA & view angle 85 degrees all around • Back lit buttons • RPM Prop • MAP Manifold Pressure • % HP Percent of Horse Power • EGT Exhaust Gas Temp. • CHT Cylinder Head Temp. • EGT Normalize mode • LOP/ROP JPI Exclusive Leaning Mode • O-T Oil Temperature • O-P Oil Pressure • F-P Fuel Pressure (when in POH) • OAT Outside Air Temp. • VDC Voltage (1) • AMP Current amps (2 twins) • Fuel Flow Transducer FlowScan • GPH Gallons per Hour GPH • REQ Required to wp or destination • USD Fuel used • H:M Endurance Hours and Minutes • MPG Miles per Gal • CLD Shock Cooling on ALL cylinders • DIFF Difference between EGT’s • USB Memory stick 1 GB • Data Recording 800 Hrs every 6 sec. • EZTrends Graphing Software free • 3 year Warranty Dimensions: EDM-900   – 3.56″ deep (connectors recessed)- 4.81″ wide – 3.47″ high Accuracy and Resolution, are two of the most misunderstood terms in instrumentation. Because an instrument displays 1 degree increments (resolution) does not mean it is accurate to 1 degree. JPI’s accuracy comes from its linearized thermocouples. Other’ put and estimating straight line through the center of the thermocouple calibration “S” curve. With this method the instrument is accurate at only three points along as the the straight line crosses the “S” curve. Therefore errors of +/- 10′ are quite possible while still displaying in 1degree resolution. Our competition is advertising +/- 1/2′ accuracy at full scale. This would mean that =/-1/2′ of 2000′ (full scale) is +/- 10′; there is a big difference. JPI has found nothing in the Aviation market that compares to our linearized accuracy.