M81714/65 Series II Inline Junction Splice | Single Splice, Size 20
$37.54
The M81714/65 Series II In-Line Junction Splices are available in single and double configurations in sizes 16, 20, and 22 AWG. These splices use an advanced polyetherimide body, one-piece bus assembly and construction. They connect two wires in-line using M39019/22 socket and pin contacts. The junctions can then be placed in a wire bundle without being mounted.
This M81714/65 Series II Inline Junction Splice accepts size 20 contacts and is a single splice.
Features
- Connects 2 wires in-line
- Houses and seals individual components
- Replacement for “Y’ splices and terminal strips
- Special configurations and designs available
- Uses M39029/22 crimp contacts
Specifications
Operating Temperature:
-55ºC to 200ºC
Insulation Resistance:
5000 MΩ (min)
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
200 VRMS at 100,000 ft.
Current Rating:
7.5 A
Vibration & Shock:
Per MIL-T-81714 Paragraph 3.5.5 & 3.5.8
Insulator Body:
Polyerthermide per ASTM-D-5205
Grommet:
Silicone Rubber per A-A-59588
Internal Contact:
Copper Alloy, Gold Finish Accordance with MIL-G-45204
| Weight | .1 lbs |
|---|---|
| Dimensions | 10 × 8 × 6 in |
| Brand | EDMO |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
3.5mm Audio Cable for smartPanel Docks with Inline Resistor (Open Wiring) – 6 Foot
6 FT - 3.5mm Audio Cable / 4-wire Open Wiring Termination with Inline Resistor
To connect your smartPanel Mount to your audio panel to allow music / multimedia to be played through your intercom system or to allow your iPad or iPhone to be used as a recording device, you will need to add a 3.5mm audio cable to your panel mount. These cables have been designed to perfectly fit the built-in smartPanel Mount audio port position.
This audio cable is a straight open-wiring audio cable with an inline components to prevent feedback when wired to the audio panel.
Cable Panel Mount USB-A Female 1.1M (3.6Ft) 4-Wires Solder Terminations Black
Designed to fit smartPower power supplies 150/250.
Apple approved lighting to USB-A Female used to connect to smartPower 150/250 power supplies. All our Lightning cables are Apple MFi certified for full compatibility. The USB cable can be installed directly on a smartPower 150/250 series USB power supplies.
Cable Apple MFi Cert. Lightning to USB-A Male 0.4M (1.3Ft) Black
Designed to fit smartPower power supplies 150/250.
Apple approved lighting to USB-A Male 0.4M (0.8') used to connect to smartPower 150/250 power supplies to assure your iPad or iPhone remains powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The USB cable can be installed directly on a smartPower 150/250 series USB power supplies.
Reviews
There are no reviews yet.