Model H10-13HXL Aviation Headset | U-174/U plugs, Helicopter
$894.25
The Model H10-13HXL aviation headset features electronic noice-cancellation (ENC) and a M-7A amplified electret microphone for offering pilots with crisp & clear communication. From a single nine-volt battery, this H10-13HXL operates up to 25 hours and has a pilot selectable auto-off function preserving battery life. Large, super-soft gel ear seal combined with a double-foam head pad offer comfort on long flights, while a flex/wire boom provides precise microphone place.
Features
- Battery power module provides up to 25 hour of operation from one 9-volt battery
- Expanded, super-soft, double-foam head pad offer comfort during long flights
- Larger and lighter undercut comfort gel ear seals
- Patented flex/wire boom provides precise microphone placement
- Pilot selectable auto-shut off
- M-7A noise-cancelling electret microphone for crisp & clear voice transmission
- Five-foot extended coiled cord
- Cord assembly connects to battery module then to panel intercom connector
- FAA TSO-C57a, TSO-C58a approved
Specifications
Weight:
18 oz
Ear Coupling:
around-the-ear
Hardware Material:
steel
Ear Dome Material:
ABS
Connectors:
U-174/U, earphone plug
U-174/U, mic plug
Connection Cable:
~5 ft coil cord (1.5 m)
Earphone Sensitivity:
90 dB SPL on flat plate coupler, re 1mW input @1KHz
Earphone Type:
Dynamic (ENC)
Ear Impedance:
150Ω, nominal (stereo)
300Ω, nominal (mono)
Ear Frequency Response:
100 Hz — 5,500 Hz
Microphone Principle:
M-7A amplified electret
Microphone Impedance:
50Ω ±20%
Microphone Sensitivity:
400mV ±6dB into 150Ω load @ 1kHz for 114 dB SPL input
Microphone Frequency Response:
300 Hz – 3,500 Hz per RTCA DO 214
Microphone DC Supply Voltage:
8V – 16V (not polarity sensitive)
Source Resistance:
470Ω
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | Faro |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally. Â
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more.  Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
D3 • Hover
The D3•Hover combines a CS3 as a wonderfully slim module for drones, along with the Pack Cap Rear to allow the bag to be configured as a backpack for those times when you need to fly and be on the move at the same time, and of course, the Pocket Cap Front for all the small stuff.
NOTE: This price DOES NOT INCLUDE ANY FOAM. This bag is configured with no foam, so you'll have to add either the Drone Foam for the DJI Spark, or the Drone Foam for the DJI Mavic Air, since these are the two foam sets designed to fit inside the CS3.
Pocket Cap Rear
The FLEX POCKET CAP REAR is exactly the same as the POCKET CAP FRONT, except it's the "opposite": This module goes onto the Rear surface of any other FLEX module (not the Front).
Now you can have lots of small pockets on the REAR of your bag, to go along with all the small pockets you already have on the Front.
Flat Cap Rear
The FLAT CAP REAR zips onto the Rear surface of all FLEX Center Sections and also directly onto a Front End Cap (PCF, FCF).
This module offers two thin pockets on the outer surface and also a thin half-height flap pocket on the inner surface. The convertible panel on the back gives you the ability to slide your BrightLine Bag onto the telescoping handles of a rolling suitcase or folding cart.
Reviews
There are no reviews yet.