C406-2
The Artex C406-2 transmits on all 3 emergency frequencies (121.5/243.0 and 406 MHz.) The ELT automatically activates during a crash and transmits the standard swept tone on 121.5 and 243.0 MHz. It also transmits a 406 MHz encoded digital message to the Cospas/Sarsat satellite system, which allows for rapid identification and reduces Search and Rescue response time.
C406-2 ELT System | Dual Output, Rod Antenna, Remote Switch
C406-2 HM
The Artex C406-2 HM is an emergency locator transmitter (ELT) that has been built to meet the rigorous requirements of TSO C126, and pass even the toughest safety tests. The C406-2 HM ELT automatically activates during a crash, and transmits a 406 MHz digital message to a worldwide network of satellites, which allows first responders to quickly and accurately identify not only where you are, but who you are as well. These factors help take the ‘search’ out of ‘search and rescue’, and allow local first responders to more easily bring you home.
C406-N
The Artex C406-N is a single output emergency locator transmitter (ELT) that contains the latitude/longitude information from the aircraft navigation system. Following long message protocol, the 406 MHz transmitter turns on and transmits an encoded digital message to the Cospas/Sarsat satellite system every 50 seconds for 520 milliseconds. During a crash, the ELT automatically activates and transmits the standard swept tone on 121.5 and 243.0 MHz.
C406-N HM
The Artex C406-N HM is a single output emergency locator transmitter (ELT) that contains the latitude/longitude information from the aircraft navigation system. Following long message protocol, the 406 MHz transmitter turns on and transmits an encoded digital message to the Cospas/Sarsat satellite system every 50 seconds for 520 milliseconds. During a crash, the ELT automatically activates and transmits the standard swept tone on 121.5 and 243.0 MHz.
CA-1 CARB TEMP FAHRENHEIT
Cable 90 Degree USB-C 1.1M(3.6 Ft) 4-wires solder Termination Black
90°(Degrees) cable USB-C to 4-wires solder termination used on iPad 11” and 12” pro series.
- Type C male 90°(degrees) upward or downward right angle cable.
- Data Sync and Charge. Reversible plug orientation and Cable direction. Plug and Play.
- Super Speed USB 3.1 transfer rates
- Length: 1.1 meter / 3.6 feet
Cable 90 degrees USB-C to USB-A 1.1M (3.6 Ft) Black
90°(Degrees) cable USB-C to USB-A used on iPad 11” and 12” pro series.
- USB3.0 male to USB 3.1
- Type C male 90°(degrees) upward or downward right angle cable.
- Data Sync and Charge. Reversible plug orientation and Cable direction. Plug and Play.
- Super Speed USB 3.1 transfer rates, backwards compatible with existing USB 3.0 and USB 2.0 devices
- Length: 1.1 meter / 3.6 feet
Cable ACD-57 or ATD-57/80/11 to RS-232 third-party devices (10ft)
Interface cable to connect uAvionix Tailbeacon X or TQ KRT-2 units to an ACD-57 or other traffic systems to ATD.
Features- D-SUB 15HD Connector and backshell for ACD/ATD, preconfigured.
- Open ends on the RS-232 third-party unit's side
