Map Light 6 FAA-PMA Cessna Certified LED Maplight | White, 12V, Panel Mount
Flight Bag PLC Elevate
Beechcraft S35/V35/V35A/V35B GFC 500 Autopilot Hardware Kit
Beechcraft A36, A36TC GFC 500 Autopilot Hardware Kit
This kit includes all the “Best Source” hardware listed in the Garmin® installation addendum including the connector and ground stud hardware for the control head and each servo listed in the Garmin® installation manual. This will save valuable billable time and allow you to do more! For Serial Numbers E572 & ON.
ETX18F
ETX18B
SmartStart
SmartStart (SS-12v) is an electronic control module that controls the operation of the engine starter system. SmartStart improves the safety and security of push-button or key-switch starting systems by providing an interlocked and time limited operation of the engine starter. The SmartStart system helps avoid unintentional activation of the engine starting system.
A SmartStart Kit is available, which includes one SmartStart control module, 8 ft. wiring harness, and airspeed switch.
Models:
- SmartStart (SS-12V)
- SmartStart Kit (includes Airspeed switch and wiring harness) (SS-12V-KIT)
Select options
This product has multiple variants. The options may be chosen on the product page
A200-HAS Hall Effect Current Shunt
The A200-HAS is an economical and precise solution for DC current measurement in electrical systems up to +/- 100A in capacity.
The output of the device has a positive slope (Vcc / 2) when an increasing current flows through the primary copper conduction path. The internal resistance of this conductive path is 130 µΩ typical, providing low power loss.
The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor leads and provide a minimum isolation of 3,000V.
Current sense response time is 3uS.
Power requirements are 3V @ 10mA. Signal output is linear and varies from 0.0V (-100A) to 3.0V (+100). Zero current is represented by 1.5V.
The sensor has two 1/4" terminal posts for connection to the power bus.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this current sense shunt is STC'd as a primary replacement.
