CI 503 GS ANTENNA COUPLER/BNC Female Connector, 329-335 MHz, 50 Ohms
M303 – Digital Temperature Gauge
M303 FEATURES LIGHT WEIGHT 2 1/4 STANDARD MOUNT OR FRONT MOUNT AUTOMATIC DIMMING MINIATURE REMOTE PROBE SUNLIGHT READABLE DISPLAYS OUTSIDE
Select options
This product has multiple variants. The options may be chosen on the product page
PLATINUM KIT/Includes: HL1920E heat gun, 75 mm spreader nozzle, 14 mm reflector nozzle, 39 mm reflector nozzle, 9 mm reduction nozzle, shrink tubes, catalog and silver case.
FT-90 Fuel Flow Transducer
FT-60 Fuel Flow Transducer
AeroLEDs Pulsar 650 Cessna Wingtip Fairing Adapter
AeroLEDs Pulsar 650 Cessna Wingtip Fairing Kit was designed for installation on original Cessna wingtips. The fairings are provided oversized and will need to be cut/trimmed and painted before installing on the wingtip. The fairing kit includes a left and right fairing along with all necessary screws and nuts for installation. This fairing kit was designed for use with the following Pulsar 650 models:
11-1280-B-12-L
11-1280-B-12-R
11-1280-B-24-L
11-1280-B-24-R
AeroLEDs Pulsar 650 Cessna Wingtip Fairing Kit fits the following aircraft models: 150L, 150M, 152, 172L, 172M, 172N, 172Q, 172R, 172S, 172RG, 177B, 177RG, 180H, 180J, 180K, 182N, 182P, 182Q, 182R, 182S, 182T, T182T, R182, A185F, 185E, U206F, U206G, TU206F, TU206G, 210K, T210K, 210L, T210L, 210M, T210M, 210N, T210N, P210N, 210R, T210R, P210R
Cub Crafters STC Kit ETX900-TSO-CUB-KIT
Approved STC installation kit to be used with corresponding STC Aircraft approval for CC18-180, CC18-180A, CC19-180 and CC19-215. This kit is for the ETX900-TSO battery. This kit DOES NOT INCLUDE the battery.
The picture of the kit is for illustrative purposes.
You may not use all the pieces in the kit;
no left over parts can be returned.
Kits are non-returnable!
TY96/TY97 Mounting Tray, Installation Kit and Manuals
RAMI AV-532L VOR/LOC/GS Receive Only Antenna
The AV-532L is a VOR/LOC/GS receive only antenna. It consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph. A 30 foot transmission line with integral balun is also supplied.
