PLATINUM KIT/Includes: HL1920E heat gun, 75 mm spreader nozzle, 14 mm reflector nozzle, 39 mm reflector nozzle, 9 mm reduction nozzle, shrink tubes, catalog and silver case.

$296.70
Platinum Kit | Includes: HL1920E heat gun, 75 mm spreader nozzle, 14 mm reflector nozzle, 39 mm reflector nozzle, 9 mm reduction nozzle, shrink tubes, catalog and silver case.

Mini-Fit Jr. Hand Crimp Tool

$296.16
For use with male and female Mini-Fit Jr. Crimp Molex Terminals, 16-24 AWG Wire.

FT-90 Fuel Flow Transducer

$296.00
FT-90 Fuel Flow Transducer FAA Approved Instrument FAA TSO’d and STC’d with EI Instruments For 350 to 550 HP engines,

FT-60 Fuel Flow Transducer

$296.00
FT-60 Fuel Flow Transducer FAA Approved Instrument FAA TSO’d and STC’d with EI Instruments Up to 350 HP engines, engine-driven

AeroLEDs Pulsar 650 Cessna Wingtip Fairing Adapter

$295.00
AeroLEDs Pulsar 650 Cessna Wingtip Fairing Kit was designed for installation on original Cessna wingtips. The fairings are provided oversized and will need to be cut/trimmed and painted before installing on the wingtip. The fairing kit includes a left and right fairing along with all necessary screws and nuts for installation. This fairing kit was designed for use with the following Pulsar 650 models: 11-1280-B-12-L 11-1280-B-12-R 11-1280-B-24-L 11-1280-B-24-R AeroLEDs Pulsar 650 Cessna Wingtip Fairing Kit fits the following aircraft models: 150L, 150M, 152, 172L, 172M, 172N, 172Q, 172R, 172S, 172RG, 177B, 177RG, 180H, 180J, 180K, 182N, 182P, 182Q, 182R, 182S, 182T, T182T, R182, A185F, 185E, U206F, U206G, TU206F, TU206G, 210K, T210K, 210L, T210L, 210M, T210M, 210N, T210N, P210N, 210R, T210R, P210R

Cub Crafters STC Kit ETX900-TSO-CUB-KIT

$295.00
Approved STC installation kit to be used with corresponding STC Aircraft approval for CC18-180, CC18-180A, CC19-180 and CC19-215. This kit is for the ETX900-TSO battery. This kit DOES NOT INCLUDE the battery. The picture of the kit is for illustrative purposes. You may not use all the pieces in the kit; no left over parts can be returned. Kits are non-returnable!

TY96/TY97 Mounting Tray, Installation Kit and Manuals

$295.00
Installation kit for TY96, TY97, TY96A, and TY97A transceivers. The Slimline panel mount is only 1.3 inches high and saves valuable stack space

RAMI AV-532L VOR/LOC/GS Receive Only Antenna

$295.00
The AV-532L is a VOR/LOC/GS receive only antenna. It consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph. A 30 foot transmission line with integral balun is also supplied.

RAMI AV-21 Special Use | UHF

$295.00
The AV-21 is a rod style broadband radio telephone antenna which utilizes a BNC connector that allows for a smaller mounting hole.  The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 feet.  It has a drag force of 0.41 lbs at 250 mph.

Illyrian II Haptic Safety Wearable

$295.00
Illyrian II Haptic Safety Wearable *does not include portable battery, or internal battery.   We recommend you keep yours plugged in,