3-Pin 28V Aircraft External Power Cable (802-683)
8ft. AN2551 3-Pin aircraft external power cable (included with 2835A, 2835AB2, 2870A and 2870A-B2 Ground Power Units).
Designed to connect an Enhanced Flight ground power unit to standard AN2552 external power receptacle found on most General Aviation aircraft. Rugged polycarbonate shell, assembled with stainless steel hardware. Torch-soldered heavy-duty copper contacts with silver plating. Up to 0 AWG wire. 50% more power handling. Up to 1600A peak.
FTA-250L Compact Communication Airband Transceiver | Comm Only, 5W Transmitter
ETX900-TSO-35-KIT
What’s included:
- 1 x Panel mount LED (11MM12)
- 1 x Battery Box Spacer (190531)
- 1 x Fault Indicator Placard (200208)
- 1 x 3/8″ Tubing (5239K15)
- 1 x 1/4″ Tubing (5239K13)
- 1 x 3/8″ Wye Tube Fitting (5463K722)
- 3/8″ ID 9/16″ OD Grommets (9600K86)
Map Light 4 Gooseneck Cessna Certified LED Maplight | White, 24V, Panel Mount
Map Light 4 FAA-PMA Cessna Certified LED Maplight | white, 12V, Panel Mount
Map Light 4 FAA-PMA Cessna Certified LED Maplight | Red, 12V, Panel Mount
Map Light 4 FAA-PMA Cessna Certified LED Maplight | Green, 12V, Panel Mount
Map Light 4 FAA-PMA Cessna Certified LED Maplight | Blue, 12V, Panel Mount
REMOTE HEADSET STATION
M22520/5-35/DIE SET FOR HX4
The DMC HX4 Crimp tool features a system of interchangeable dies which eliminate the need of separate fixed die crimp tools for each and every different application. Many maintenance and manufacturing concerns have standardized on this model, thus eliminating the cost associated with maintainaing and calibrating bulky inventories of single purpose tools.
RAMI AV-530 Airborne Communications | VHF
The AV-530 is designed for broadband communications. The antenna has a die-cast aluminum base and a tapered stainless steel whip for less drag at higher airspeeds. It is supplied with a weather-sealing gasket and mounting hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 1.65 lb @ 250 mph. This antenna is a direct replacement for the CI 292-1.
Cable ACD-57 to Becker Radios (3ft)
Interface cable to connect a Becker AR/RT-6201 VHF Radio to an ACD-57. Includes interface converter circuitry
Features
- D-SUB 15HD Connector and backshell for ACD-57, preconfigured.
- D-SUB 25 connector on the Becker side.
- Includes interface converter circuitry.
Compatible with: ACD-57 Becker AR-6201, Becker RT-6201
