Optimate TM-522-D4 40W (3amp) Solar Battery Charger/Maintainer (12-13.2V Batteries)
$195.95
The Optimate TM-522-D4 Lithium solar charger will charge and maintain your lithium battery with 3 amps / 40W of energy.
What’s included:
- 1 x TM-522-D4 solar charger/maintainer
- 1 x battery alligator clips
- 1 x waterproof quick connect lead
- 1 x solar duo controller
CHARGE
Fastest charge is delivered as ‘smart charge’ control selects pulse or continuous charge according to sunlight strength.
Intelligent maintenance continues the next day if battery retained charge overnight, otherwise the program reverts to OPTIMIZE step.
MONITOR
Battery condition is displayed every 3 seconds. Ready indication for STD, hi-performance AGM and lithium LFP batteries. Draws less than 0.5mA during monitor mode.
Automatically switches to CHARGE when solar power is sufficient.
MOUNTING
The OptiMate charger-monitor controller is separate to the solar panel and can be placed close to the vehicle or battery so that charge and maintenance progress can be easily followed. The solar panel must be mounted and angled to receive direct sunlight. The reach / distance between battery and panel is 315cm / 124″.
Outer dimension (including corner mount brackets): 16.6”W x 27”H x 1.25“D
Weight of panel: 6.8lbs
Solar Panel:
POWER : 40 Watts (max.)
VOLTS : 12V / 12.8V
USE : Outdoor.
STYLE : Weatherproof – polycrystalline, aluminium frame with 4 x mounting brackets, output cable 200cm / 80″ with SAE connector.
OptiMate Charge-Monitor controller:
SAVE : Low Volt Start of 4V
IDEAL FOR : STD, AGM & GEL 12V batteries from 2 – 240Ah and Lithium LFP 12.8V / 13.2V batteries
INPUT : 15 – 22V
SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.
Technical Specifications
- Recommended for LiFePO4 batteries: 12.8V / 12.3V
- Weight: 6.8lbs
- Dimensions (including corner mount brackets): 16.6″W x 27″H x 1.25″D
- Charging Amps: 3.33A from 40W panel (max average current)
- Input & output cable lengths: 2m
- Lowest operating temperature: -20°C / -4°F
- Warranty: 3 years limited warranty through OptiMa
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | EarthX Batteries |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
BB-TH-U Thermal Battery Box “U” Case
Thermal battery box to protect from radiated or convection heat. This battery box is designed to be compatible with our existing “U” case battery models; ETX1600, ETX900-24, ETX680-24-VNT.
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. Weight is .68Kg or 1 Lb. 8oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140 deg F (60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
BB-MU2 Light Weight Aluminum Battery Box
The light weight aluminum battery box is excellent to use with the EarthX lithium “E” case batteries for easy installation. Has a bolt-down tab for easy removal of the battery from the front or top, and is acrobat rated (even with PC680).
This battery box can be used with: ETX680, ETX900, ETX900-VNT, ETX1200, and Odyssey’s PC680
If you are using the battery box for the EarthX Lithium batteries, you will use a foam spacer on the left and right side of the battery for a snug fit. If you are using the battery box for the PC680, you will use the foam spacer on the backside at the bottom of the case to adjust for the tapering of the case for a snug fit.
This battery box was engineered to be strong enough to withstand 30 G of force for the EarthX Lithium Batteries or 6G of upward force and 9G of downward force with the PC680. It only weighs .23Kg or 8oz. This unique design allows for simple, easy installation with the dimensions: 7.1″ L x 3.1″ W x 6.5-6.6″ (adjustable height) or (180mm x 80mm 166-168mm).
What’s included:
- 1 x battery box
- 1 x top front removeable hold down tab
- 2 x screws for hold down
BB-CU Custom Light Weight Battery Box For “E” Case
This custom designed battery box will fit your battery like a glove and is super easy to install. Designed aluminum battery box for the ETX680/ETX900/ETX900-VNT/ETX1200. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .2Kg or 7.2oz. This unique design allows for simple, easy installation with the dimensions: 6.5″ L x 3.1″ W x 6.6″ H.
Reviews
There are no reviews yet.