Passive GPS Antenna Splitter | 1 Input, 2 Output, BNC Connector
$517.50
This loaded DC blocked passive splitter features one input and two outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.
This passive GPS splitter has one input and two output ports and has BNC connectors.
Features
- Precise amplitude balance: <1 dB variation between ports
- Flat group delay: <1 ns variation between L1 & L2
- Low insertion loss: -4.0 dB loss typical across operating frequencies
- Wide accepted frequency range: cover entire L-band & major GNSS constellations
- Efficiently block ports: 200Ω resistors prevent antenna alarm faults
- Matched phase balance: 2° variation between ports
Specifications
Weight:
10.2 oz (289 g)
Dimensions:
1.3 x 3.25 x 2.5 in, max. (not including connectors)
Operating Frequency:
-57°C to 87°C
Frequency Range:
1.1 GHz — 1.7 GHz
Characteristic Impedance:
50Ω
Input SWR:
2.0:1, max.
Output SWR:
2.0:1, max.
Insertion Loss:
-3 dB to -5 dB
Gain Flatness:
0.25 dB, typical (1.0 dB, max.)
Amplitude Balance:
0.1 dB, typical (1.0 dB, max.)
Phase Balance:
1.0°, typical (2.0°, max.)
Isolation:
L1: 22 dB, min.
L2: 15 dB, min.
Group Delay Flatness:
0.1 ns, typical (1.0 ns, max.)
Connector Option:
BNC connector
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | GPS Networking |
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally. Â
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more.  Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
ADS-B Out Approved GPS Upgrade
Upgrade your current iLevil2 or iLevil3 unit with an ADS-B out Approved GPS. After your purchase, if you haven't done so already, you will need to send us your past generation unit and we will hold this order until we receive it. Once the unit is received, we will send back your newly upgraded unit.
Additional information on the certified GPS
- GPS source meets the position source performance requirements of §91.227 for ADS-B OUT in the experimental and light sport aircraft market.
- Ability to communicate with currently installed transponders (mode-s), to activate extended squitter, meeting ADS-B mandate for 2020 on experimental and light sport aviation.
