Category – Airframe Parts – Antennas
CI 295-300 SAR TRI BAND ANTENNA/White, 136-174 MHz and 380-520 MHz and 764-870 MHz, Single Port
The CI 295-300 tri-band, single-port, airborne SAR antenna is designed to provide frequency coverage to Search and Rescue teams using Motorola’s APX® architecture. For maximum effectiveness and connectivity, the CI 295-300 operates within P25 standards. This blade antenna is rated for helicopter and fixed-wing turbine powered jet installations in the toughest vibration environments. The single-port design reduces installation time and saves space — providing room on the aircraft for other mission critical antennas or equipment vital to search and rescue operations.
DM NI50-4-2 DME/ATC L-Band Antenna | 960MHz – 1,220MHz, 6-hole, Type HN Male Connector, Gloss White
The NI50 Series are low-profile, all-metal, L-band blade antennas built for mechanical strength and reliability for business, commercial, and military aircraft. The design of these antennas provide extremely high, side load strength, sealed construction against the intrusion of moisture, and lightening protection to prevent damage to electronic equipment.
AV-529 VHF Comm Whip Antenna | 118-137 MHz
RAMI AV-587 Antenna Accessories | Diplexer, Splitter
RAMI AV-1 Base Station | VHF
The AV-1 is a base station antenna for VHF communications with ground vehicles or aircraft. It has heavy-duty construction with 3/8″ diameter aluminum radials and a 1″ diameter aluminum tube radiator. These elements are treated with a “hexavalent free” passivation process per MIL-81706 and MIL-5541 for superior durability. It mounts easily to a 1″ diameter pipe or a 1-1/4″ O.D. tube with locking set screws. A built-in gap-type lighting arrestor is an important design feature. The antenna operates at a frequency of 118 – 137 MHz, and requires no additional tuning. It is designed to withstand wind speeds of up 100 mph.
RAMI AV-200 Airborne ELT
The AV-200 ELT antenna is intended for use with a 406 MHz ELT (Emergency Locator Transmitter) for General Aviation. It is a passive two frequency wire whip, designed for low speed aircraft (up to 250 knots). It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies.
RAMI AV-289 General Aviation | Cellular, L-Band, WiFi Antenna
The AV-289 is a broadband blade type antenna for application such as Transponder, Cellular, 4G, GSM, PCS, WIFI, and UMTS. It is also FAA qualified as a transponder antenna. The antenna housing is constructed of a Polyarylamide Plastic shell and the base is 6061-T6 aluminum with a chemical conversion coating per MIL-C-5541. The antenna is supplied with an o-ring and mounting hardware. The antenna is designed to operate at speeds up to Mach 1 and altitudes up to 55,000 feet. This antenna has Dual-Band, L-Band, and Wideband capabilities.
RAMI AV-12 VOR/LOC/GS Receive Only Antenna
The AV-12 is a VOR/LOC/GS receive only antenna which uses a highly efficient technique of molding the elements directly into a high-impact thermo-setting bakelite center insulator. The stainless steel elements are ground to close tolerances to provide a low profile. The antenna is designed to operate at both UHF and VHF frequencies, speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.92 lb @ 250 mph.
CI 211-1 VHF Communications Bent Blade Antenna | 118-154MHz Wide Band, BNC
The CI 211series antenna are high speed bent blade antennas designed as a low profile, top or bottom mount for large twins and medium jet aircraft. Skydrol and rain erosion resistant. The CI 211-1 & CI 211-16 have an extended frequency band (118 MHz to 154 MHz). The CI 211-L and CI 211-1L are equipped with leading edge protection.
RAMI AV-801 WAAS GPS Antenna
WAAS GPS Antenna
RAMI AV-926 Triplexer
RAMI AV-927 Diplexer