Category – Airframe Parts – Antennas
CI 120-4 VOR GS POWER COMBINER/BNC Female Connector, 108-118 MHz and 329-335 MHz, 50 Ohms
The CI 120 series VOR/GS power combiners are either a two-input and one output, or two input and two output power combiner designed for the CI 120G/S blade set. It combines VOR/LOC and GS signals from individual blades and are typacally used with one or two coaxial cable runs to feed NAV1 or NAV2 receivers.
CI 120-5 VOR GS POWER COMBINER/BNC Female Connector, 108-118 MHz and 329-335 MHz, 50 Ohms
The CI 120 series VOR/GS power combiners are either a two-input and one output, or two input and two output power combiner designed for the CI 120G/S blade set. It combines VOR/LOC and GS signals from individual blades and are typacally used with one or two coaxial cable runs to feed NAV1 or NAV2 receivers.
CI 120-7 TNC power combiner / for CI 120-200G/S-L
The CI 120 series VOR/GS power combiners are either a two-input and one output, or two input and two output power combiner designed for the CI 120G/S blade set. It combines VOR/LOC and GS signals from individual blades and are typacally used with one or two coaxial cable runs to feed NAV1 or NAV2 receivers.
K220A Com Whip Antenna | Magnetic Mount, 118-136 MHz
SLANT ANTENNA FOR KRA10A
ANTENNA FOR KRA10A
TA50 Compact GPS Antenna | 3m (118in) Cable, SMA Connector
The TA50 Compact GPS Antenna is perfect for gliders and light sport aircraft with limited space and mounting options. This GPS antenna is compact and easy to stow, and it is designed to provide trouble-free operation when used with a TN72 GPS position source. Adding the TA50 to a TN72 is a cost-effective way to make a Trig Mode S transponder into an ADS-B Out solution for improved visibility and safety.
This TA50 compact antenna has an SMA connector and a three-meter length.
*Transponder and TN72 GPS sold separately
RAV30512B Broadband Antenna | 30-512MHz, 50 Ohms, 50 Watts, TNC female, Black
The RAV30512 is a broadband airborne communications antenna designed for air speeds less than Mach 1. The antenna housing is a fiberglass epoxy design to withstand the exposure to sand and dust particles of desert areas. The antenna is foam filled to reduce the effects of extreme temperature changes, extreme humidity and excessive shock and vibration. It is mechanically and environmentally qualified to MIL-A-55680 (AT-1108) and has continuous operation altitudes of up to 50,000 feet and temperatures between -65º F and 131º F. It can also withstand the impact shock of 30g and the steady-state acceleration of 6g. This antenna has the same mounting pattern and footprint as the AT-1108/ARC for easy interchangeability if needed. A conductive mounting gasket is supplied with this product.
This RAV30512 Broadband Antenna comes in black.
VHF Communications Antenna | 118-137 MHz, 4-Bolt Mount, BNC Female Connector, Gloss Black
The AV-10 VHF communications antenna is designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base. The antenna essentially matches the styling of the communication antenna currently used on most single and light twins. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 feet. It has a drag force of 2.70 lbs @ 250 mph. This antenna is a direct replacement for the CI 121.
This antenna comes in gloss black.
AV-289 Broadband Blade Antenna | SMA Connector, 4G, GSM, PCS, WIFI & UMTS
AV-289N Broadband Blade Antenna | N Connector, 4G, GSM, PCS, WIFI & UMTS
Glidescope Antenna
The 37P-4 is designed for use with Glide Slope receivers for reliable performance. The antenna is lightweight and is suitable for mounting either in a radome or externally on the aircraft. The antenna is provided with an adapter plate with an 11"" radius for mounting on rounded fuselages. The antenna has an ""N"" Type Female Connector and is finished with a chemical film coating per Military Specification MIL-C-5541, Class 1A for maximum corrosion protection in a salt-laden atmosphere.
VHF Communications Antenna | 118-137 MHz, 4 Hole Mount, BNC Female Connector, Gloss Black
The AV-17 is designed specifically for mounting to the underside of an aircraft, providing an excellent radiation pattern for air-to-ground communications. It has a 4-bolt mounting base and is low in profile. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.66 lb @ 250 mph. This antenna is a direct replacement for the CI 122.
This VHF communications antenna has a gloss black finish.
Blade Antenna | Broadband, 960-1220 MHz | Gloss Black
The AV-74 is a broadband blade type antenna for transponder or DME application. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.09 lbs @ 250 mph. This antenna is a direct replacement for Comant’s model CI-105.
Vehicular Antenna | SATCOM | Tan
The RAMI8711 is an extremely rugged UHF SATCOM antenna with Right Hand Circularly Polarized (RHCP) designed for tactical vehicles for on the move (OTM) applications. The low profile design reduces interference from overhanging objects and has a low visual signature. The antenna has the frequency coverage to support both Legacy and MUOS UHF communication needs and can cover the entire hemispherical Field of View (FOV) with a single output port which eliminates the need to switch between high and low angles. The antenna has been designed to interface with a standard NATO mount and can be elevated on a riser if needed.
