Category – Avionics – Antennas
RAMI AV-401 Airborne ELT Antenna
CI 5120 Antenna Splitter | Dual VOR/LOC/GS, BNC
The CI 5120 Dual VOR/LOC/GS splitter is designed to be used the Garmin GNS 580 and similar systems that have a single input for VOR/LOC and GS. The CI 5120 splits a single coax antenna input into equally proportioned VOR/LOC/GS outputs, allowing operation of two single input receiver from one antenna.
RAMI AV-590 & AV-590(-28) COM Electronic Switch
The AV-590 is an electronic switch allowing two COM radios to share the same COM antenna.
In receive mode, it acts as a signal splitter allowing both COM radios reception across the entire COM band (118-137 MHz).
In transmit mode, which ever COM radio (COM 1 or 2) is selected through the audio panel, a control signal is sent to the AV-590, switching the selected COM radio to the COM antenna and isolating the remaining COM radio from the COM antenna.
Once no longer transmitting, the control signal is removed and the AV-590 electronic switch reverts back to the receive mode as described above.
RAMI AV-1 Base Station | VHF
The AV-1 is a base station antenna for VHF communications with ground vehicles or aircraft. It has heavy-duty construction with 3/8″ diameter aluminum radials and a 1″ diameter aluminum tube radiator. These elements are treated with a “hexavalent free” passivation process per MIL-81706 and MIL-5541 for superior durability. It mounts easily to a 1″ diameter pipe or a 1-1/4″ O.D. tube with locking set screws. A built-in gap-type lighting arrestor is an important design feature. The antenna operates at a frequency of 118 – 137 MHz, and requires no additional tuning. It is designed to withstand wind speeds of up 100 mph.
RAMI AV-801 WAAS GPS Antenna
RAMI AV-801 General Aviation | GPS
DM H24-1 Antenna Coupler | Dual GS, BNC Connector
The H24-1 Dual Glide Slope Diplexer allows operation of two glide slope receivers from one glide slope antenna. The unit is housed in an aluminum case and all circuit components fully encapsulated for vibration protection as well as waterproof protection.
- Instrument landing system redundant couplers
- Minimum insertion loss
CI-505 Diplexer | Dual VOR/Single GS, BNC
CI 291 VHF ROD ANTENNA/BNC Female Connector, 118-137 MHz, 50 Ohms, 50 Watts, 3 Hole Mount, Airspeed 250 Knots & a White Finish
CI 122 VHF BENT WHIP ANTENNA/BNC Connector, 118-137 MHz, 50 Ohms, 50 Watts, Airspeed 350 Knots, Includes Gasket B12607-3, 4 Hole Mount & a White Finish
RAMI AV-520 VOR/LOC/GS Antenna
RAMI AV-525 VOR/LOC/GS Receive Only
DM H21-1 Antenna Coupler | Includes Marker Beacon Support
The H21-1 dual VOR or dual marker beacon diplexer will permit operation of two NAV receivers form one VOR antenna or two marker beacon receivers from one marker beacon antenna. The unit is housed in an aluminum case and all circuit components fully encapsulated for vibration protection as well as waterproof protection.
VHF Communications Antenna | 118-137 MHz, 4 Hole Mount, BNC Female Connector, Gloss Black
The AV-17 is designed specifically for mounting to the underside of an aircraft, providing an excellent radiation pattern for air-to-ground communications. It has a 4-bolt mounting base and is low in profile. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.66 lb @ 250 mph. This antenna is a direct replacement for the CI 122.
This VHF communications antenna has a gloss black finish.
