Category – Electrical – Batteries
BB-CO2- Light weight aluminum battery box for “C” case
The light weight aluminum battery box is excellent to use with the ETX680C EarthX lithium battery. Has a bolt-down tab for easy removal of the battery from the front or top, and is acrobat rated.
This battery box can be used with: ETX680C
ETX680-24-HDB Hold Down Bracket
This is a 16-gauge stainless steel hold down bar designed for easy and efficient installation using the existing battery box location that was designed for a much larger lead acid battery. It is light weight, durable, and makes for a very clean installation. It is designed for these battery models: the ETX680-24-TSO; ETX680-24-VNT, and the ETX900-24.
This battery hold down bracket is designed for the ETX680-24-TSO and the ETX680-24-VNT lithium aircraft batteries.
ETX-JMP Replacement Cable
ETX-JMP 12V/24V Replacement cable for the 12V-24V Jump pack.
Empty E Case (For Fitment)
Empty E case shell to see if your battery fits in your aircraft!
Need just an empty shell while you are planning and building? Here is the easy solution for you. The “E”case dimensions are 6.5″ L x 3.1″ W x 6.6” H (166 x 79 x 168mm). The battery models that come in the “E” case are: ETX680, ETX900, ETX900-VNT, ETX1200.
OVPD-TM Over Voltage Protection Device with Test Mode
Empty C Case (For Fitment)
C Case shell for testing how an EarthX battery would fit in the space in your aircraft.
Vent Port Kit
This kit includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
210622 G25 Foam Insert
Super easy installation for the “E” case EarthX battery such as the ETX900-TSO battery if you have a battery box for the Concorde RG25 or Gill G-25 in your aircraft. This custom designed insert is a fire retardant, foam spacer that fit snugly into the existing battery box.
Weight: .115Kg or .25 pounds
5670K17 1/4″ SS Elbow
5463K722 3/8″ Wye Fitting
5670K18 3/8″ SS Elbow
230908 Foam Insert
Shop our custom designed foam insert which is a fire retardant, foam spacer that fits snugly into the existing battery box. Installation is quick and easy.
This custom designed insert is a fire retardant, foam spacer that fit snugly into the existing battery box for battery fitment. Used in six-sided battery boxes for a 28V system replacing the RG24-11M, RG24-13M or RG24-15M lead acid batteries.
