Category – Electrical – Battery Accessories
Optimate TM-281 5amp Battery Charger/Maintainer/Power Supply (24-28V Batteries)
This item is backordered until the mid-July. We are sorry for the inconvenience, but you can order it now and we will ship it out ASAP!
The Optimate TM-281 is designed for 24-28V Lithium batteries. This will charge and maintain your lithium battery with 5 amps of energy. This lithium charger also has a “tune” or power source mode of delivering 4 continuous amps of energy so you can program your EFIS or retune your car plus a pushbutton activated BMS “wake up” mode to safely wake up a battery out of sleep mode.
Features:
- Lithium Battery Charger
- Lithium Battery Maintainer
- Power Supply (press TUNE button)
Optimate TM-275 9.5amp Battery Charger/Maintainer/Power Supply (12-13.2V Batteries)
This Optimate Plug in the Wall Lithium charger will quickly charge your battery at 9.5 amps, maintain it at the optimal voltage, and can be used as a power source of 5 continuous amps! For example, you can use it as power supply while programming your aircraft EFIS so you are not draining your battery while you work.
Features:
- CHARGER
- MAINTAINER
- POWER SUPPLY (press TUNE Button)
What’s included:
- 1 x TM-275 charger/maintainer/power supply
- 1 x battery alligator clips
- 1 x waterproof quick connect lead with ringlets and SAE connector
AN2551 3-Pin Aircraft External Power Plug (904-342)
AN2551 3-Pin Aircraft External Power Plug
Designed to plug into standard AN2552 external power receptacle found on most General Aviation aircraft. Rugged polycarbonate shell, assembled with stainless steel hardware. Torch-soldered heavy-duty copper contacts with silver plating. Up to 0 AWG wire. 50% more power handling. Up to 1600A peak. Sometime referred to as a NATO or Cessna style plug.
Piper Aircraft Jumper Cable (802-690B)
Features
- Piper single-pin external power plug
- PVC-coated insulated copper jaw clamps
- 20 ft. 4AWG cable
Heavy-duty 500-amp/600 peak, 20 foot, 4-gauge, tangle-free rubber-coated cables. Terminated with PVC-coated insulated copper jaw clamps at one end and single-pin Piper aircraft external power plug.
ETX900-TSO-INSTALL-KIT
OVPD- Over Voltage Protection Device
This device is designed to “crowbar” the Circuit Breaker by applying a short circuit electronically and “pop” the current Alternator Field Circuit Breaker when voltage is over 16 Volts to protect all of your electronics in your vehicle. If you want an OV device that has a “test button mode” we also offer this model: OVPD-TM Over Voltage Protection Device With Test Mode
ETX900-TSO-35-KIT
What’s included:
- 1 x Panel mount LED (11MM12)
- 1 x Battery Box Spacer (190531)
- 1 x Fault Indicator Placard (200208)
- 1 x 3/8″ Tubing (5239K15)
- 1 x 1/4″ Tubing (5239K13)
- 1 x 3/8″ Wye Tube Fitting (5463K722)
- 3/8″ ID 9/16″ OD Grommets (9600K86)
ETX900-TSO-35-M20-KIT
What’s included:
- 1 x Panel mount LED (11MM12)
- 1 x Battery Box Spacer (211215)
- 1 x Fault Indicator Placard (200208)
- 1 x 3/8″ Tubing (5239K15)
- 3 x 1/4″ Tubing (5239K13)
- 1 x 3/8″ Wye Tube Fitting (5463K722)
- 1 x 3/8″ ID 9/16″ OD, 1/8″Grommets (9600K86)
- 1 x 3/8″ ID 9/16″ OD, 1/16″ Grommets (9600K316)
- 1 x Battery Cable (BA2-38-2)
ETX900-TSO-AVIAT-KIT
STC installation kit to be used with the ETX900-TSO
We are adding kits for many other make/models. Please check back regularly.
G35 Cessna Custom Molded Foam Insert
210608 G35 Piper Custom Molded Foam Insert
211215 G35 Mooney Custom Molded Foam Insert
ETX-QCC4 EarthX 48″ Quick Connect Cable
SPECIFICATIONS
- Max jump start amps: 400 amps
- Length: Battery “pigtail” cable = 48”/122 cm
- Jump pack adapter cable: 12”/30 cm
- 1/4″ / M6 ringlets
- Industry standard 2-pole SAE connector, with rubber sealing cap.
- Cable max. rating: 400 Amp
When not in use, keep rubber sealing cap closed on the SAE connector end.
You can then use this pigtail to charge your battery or for jump starting.
If the cables get hot, disconnect and allow them to cool down before use.
Caution: Never use the supplied battery chargers pigtail cables that comes with your charger for jump starting as they are not designed to carry this amount of amperage. Only use the EarthX quick connect (model# ETX-QCC4) cables to jump the battery.