Category – Instruments – All
CO Guardian Aero 451-101 Panel Mount CO Detector
Basic Panel Mounted CO Detector for Certified Aircraft (NORSEE)
CO detector comes with a solder cup connector.
CO Guardian Aero 451-201 Remote Mount CO Detector
Basic Remote Mounted CO Detector for Certified Aircraft (NORSEE)
CO detector comes with a solder cup connector.
CO Guardian 354 Remote Mount CO Detector with Bluetooth
CO Guardian 354-101 Panel Mount CO Detector with Bluetooth
AV-APA Experimental
FP-5L Digital Fuel Computer
FP-5L Fuel Computer FAA Approved Instrument STC’d and PMA’d Upgrade your aircraft panel with the most comprehensive fuel computer available.
Slim-Line Tach
Slimline™ gauges are really popular with the pilot who refuses to sacrifice reliability and accuracy, when it comes to engine and flight data.
Please note: Slimline Tach gauge are only STC’ed as advisory, not primary.
A200-PSF Fuel Pressure Sensor
The A200-PSF is a bulk micro-machined, gage type pressure sensor for use in both harsh and benign media with superior accuracy over an operating temperature of -40°C to 105°C. It has superb accuracy of +/- 0.5% full scale.
It contains a custom ASIC which provides signal conditioning for calibration and temperature compensation at the point of measurement. Each sensor is traceable to NIST calibration standards.
Power requirements are 5V / 10mA. Signal output is linear and varies from 0.5V (0 PSI) to 4.5V (100 PSI). Overpressure burst rating is 300 PSI.
The sensor has a 1/8" NPT threaded port for connection to the fuel pressure line.
Supplied with a 36" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this pressure sensor is STC'd as a primary replacement.
E-1P Single EGT Primary Instrument
A-1 Carb or OAT Instrument
A200-HMB – Bendix Rotational Speed Sensor
The A200-HMB is an Hall Effect rotational speed sensor. It provides a speed accuracy of 1 RPM when used in conjunction with the TM200 instrument.
The output signal is a latched, pulse width modulated square wave output of 0V to a maximum of 30V, proportional to rotational speed.
Power requirements are 3.8V to 30V / 3mA.
Precision machined from 6061 T6 aircraft grade aluminum, this sensor is designed to thread into the vent hole of Bendix unpressurized magnetos.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this speed sensor is STC'd as a primary replacement.
M655 Five Function Indicator
M655 FEATURES 2 1/4″ STANDARD MOUNT OR FRONT MOUNT OUTSIDE AIR TEMPERATURE (°F) OUTSIDE AIR TEMPERATURE (°C) PRESSURE ALTITUDE DENSITY
M800 Series Digital Clock | 5V NVIS Green A Lighting, Keep-Alive Memory Battery, Black
VA-1A Volts/Amps
VA-1A Volts/Amps FAA Approved Instrument FAA STC’d as a Primary Replacement. Upgrade your aircraft panel with the most precise
