Category – Instruments – All
RemoteFlo Fuel Flow Transducer Installation Kit | Robinson R66
A200-HMS – Slick/Unison Rotational Speed Sensor
The A200-HMS is an Hall Effect rotational speed sensor. It provides a speed accuracy of 1 RPM when used in conjunction with the TM200 instrument.
The output signal is a latched, pulse width modulated square wave output of 0V to a maximum of 30V, proportional to rotational speed.
Power requirements are 3.8V to 30V / 3mA.
Precision machined from 6061 T6 aircraft grade aluminum, this sensor is designed to thread into the vent hole of Slick/Unison unpressurized magnetos.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this speed sensor is STC'd as a primary replacement.
A200-TSA Outside Air Temperature Sensor
The A200-TSA is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accuracy of +/- 0.5°C over the full operating range.
The output voltage is proportional to the temperature x the supply voltage (ratiometric). The output swings from 0.25 V at −50°C to +4.75 V at +150°C using a single +5.0 V supply.
The temperature transfer function is:
VOUT = (V+/5 V) × [1.375 V +(22.5 mV/°C) × TA]
Power requirements are 5V / 1mA.
The sensor has a 5/16-24 threaded body and is supplied with two nylon mounting washers and a Nyloc fastening nut.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this temperature sensor is STC'd as a primary replacement.
MB800AIS Digital Clock
MB800AIS Features • YOKE MOUNT FOR BEECHCRAFT KING AIR • TWO BUTTON CONTROL SYSTEM • UNIVERSAL TIME • LOCAL TIME
TC90 Controller with installation kit (dual upgrade)
M800 Series Digital Clock | 5V NVIS Green A Lighting, Black
ResQLink View | 406MHz, Digital Display PLB
FTA-450L Communication Airband Transceiver | Comm Only, 5W Transmitter
B800 Yoke Mount Digital Clock for Beechcraft King Air | 5V NVIS Green A Lighting, Black Color
A200-TSO Oil Temperature Sensor
The A200-TSO is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accuracy of +/- 0.5°C over the full operating range.
The output voltage is proportional to the temperature x the supply voltage (ratiometric). The output swings from 0.25 V at −50°C to +4.75 V at +150°C using a single +5.0 V supply.
The temperature transfer function is:
VOUT = (V+/5 V) × [1.375 V +(22.5 mV/°C) × TA]
Power requirements (when used with any 200 Series instrument) are 5V / 1mA.
The sensor has a 5/8-18 threaded body and includes a copper crush washer.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this temperature sensor is STC'd as a primary replacement.
400 Series Voltage & Amperage Meter | 2-1/4 Mount, 28V Orange Lighting
M475VA Voltage & Dual Amperage Meter | 2-1/4 Mount, 5V Orange Lighting | Remote Version
400 Series Voltage & Amperage Meter | 2-1/4 Mount, 14V Orange Lighting
CO Guardian 353P-101 Panel Mount CO Detector
Panel Mounted CO Detector for Experimental/Homebuilt Aircraft with Cabin Pressure Warning
CO detector comes with a solder cup connector.
CO Guardian 353P-201 Remote Mount CO Detector
Remote Mounted CO Detector for Experimental/Homebuilt Aircraft with Cabin Pressure Warning
CO detector comes with a solder cup connector.
