Category – Instruments – All
M650
M650 FEATURES UNIT FOR TESTING BLIND ENCODERS ON TEST BENCH PRESSURE ALTITUDE AUTOMATIC DIMMING SUNLIGHT READABLE DISPLAY SPECIFICATIONS Pressure Altitude:
Select options
This product has multiple variants. The options may be chosen on the product page
M800R Remote Digital Clock Chronometer | 5V, Orange Lighting | Remote Unit
M450 Digital Voltmeter
M450 FEATURES MINIMUM PANEL SPACE LIGHT WEIGHT AUTOMATIC DIMMING SUNLIGHT READABLE DISPLAY LASER ENGRAVED FACEPLATE VOLTAGE WITH FLASHING ALARM FAA-PMA
Select options
This product has multiple variants. The options may be chosen on the product page
PROBE-2FT-RB
A200-TSO Oil Temperature Sensor
The A200-TSO is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accuracy of +/- 0.5°C over the full operating range.
The output voltage is proportional to the temperature x the supply voltage (ratiometric). The output swings from 0.25 V at −50°C to +4.75 V at +150°C using a single +5.0 V supply.
The temperature transfer function is:
VOUT = (V+/5 V) × [1.375 V +(22.5 mV/°C) × TA]
Power requirements (when used with any 200 Series instrument) are 5V / 1mA.
The sensor has a 5/8-18 threaded body and includes a copper crush washer.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this temperature sensor is STC'd as a primary replacement.
PT-100GA – Pressure Transducer
PT-30GA – Pressure Transducer
PT-300GA – Pressure Transducer
VS-3 Bluetooth Headset
Voltmeter | Remote Sensing |1.25 Round mount
M451 Digital Voltmeter
M451 FEATURES MINIMUM PANEL SPACE LIGHT WEIGHT AUTOMATIC DIMMING SUNLIGHT READABLE DISPLAY VOLTAGE(REMOTE OPTION AVAILABLE) FAA-PMA APPROVED SPECIFICATIONS Range: 8
Select options
This product has multiple variants. The options may be chosen on the product page
A200-HAS Hall Effect Current Shunt
The A200-HAS is an economical and precise solution for DC current measurement in electrical systems up to +/- 100A in capacity.
The output of the device has a positive slope (Vcc / 2) when an increasing current flows through the primary copper conduction path. The internal resistance of this conductive path is 130 µΩ typical, providing low power loss.
The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor leads and provide a minimum isolation of 3,000V.
Current sense response time is 3uS.
Power requirements are 3V @ 10mA. Signal output is linear and varies from 0.0V (-100A) to 3.0V (+100). Zero current is represented by 1.5V.
The sensor has two 1/4" terminal posts for connection to the power bus.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this current sense shunt is STC'd as a primary replacement.
