smartPanel Mount Package for Apple iPhone 6, 7, and 8
For Both FAA Certified and Experimental Aircraft – Includes Panel Mount, 150-201 2.7 Amp Power Supply, Lightning Cable, and 3.5mm Audio Cable
Full Package Includes:
- smartPanel Mount for iPhone 6/6S/7/8
- smartPower 150-201 2.7 amp Single Power Supply (Powers Mount Only)
- Apple MFi Lightning Cable with Open Wire Termination
- 3.5mm Audio Cable with Open Wire Termination
- D-Sub 15-pin Solder Connector
- D-Sub Cable Shield
The smartPanel Mount Package for Apple iPhone 6, 7, and 8 is a flush mounting system to easily dock and seamlessly integrate your existing iPhone 6/7/8 into your aircraft instrument panel — giving it a clean, professional appearance in an easy to view position! Once installed, the smartPanel mount allows your iPad to be docked in seconds, fully connected to the included 2.7 amp power supply and audio with built-in cable ports. Removal is just as easy — just slide, push, and remove!
If you were to buy all the components in this package on their own, you would spend $349 — at $299, this money-saving package includes everything you will need to install and integrate the iPhone 6 or iPhone 7 with your aircraft – panel mount, 2.7 amp power supply, and power and audio cables included.
Compatible with all models of iPhone 6, 6S, 7, and 8 the smartPanel Mount allows you to transform your new or existing panel and use the smaller sized iPhone in the cockpit, fully integrated with your instrument panel. Your charts and approach plates are in easy sight for reference and you can even use your iPhone 6/7/8 as a small multi-function display with the many popular iOS aviation apps available.
Now Approved for FAA Certified Part 23 Aircraft and Part 27 and 29 Rotorcraft
All smartPanel Mounts and Power Supplies from Guardian Avionics are approved for installation in certified aircraft and rotorcraft under 14 CFR Part 23, 27 and 29 as “Non-Required Safety Enhancing Equipment” (NORSEE) as outlined in FAA memorandum number PS-AIR-21.8-1602. Mounts and power supplies may be installed as a minor alteration. Please refer to this link for the Guardian Avionics NORSEE Letter of Authorization.
Designed for General Aviation in mind.
The smartPanel Mount for iPad iPhone 6/7/8 was designed by aerospace engineers to perform in the unique environment of the cockpit. The spring actuated mounting cradle securely holds the iPhone in place during the roughest of turbulence. The clean, flush mount has a shallow chassis allowing it to be easily installed in even the smallest of instrument panels. Built-in ports for the included Apple Lightning cable and 3.5mm audio cable in the package will keep cables safely and securely positioned behind the panel, allowing you the ability to connect to power, data, and audio without the cord mess. The included smartPower 150-201 power supply will convert any aircraft power from 9 to 48 volts down to the 5 volt, 2.7 amp power needed to power and charge your iPhone.
Packaged with smartPower 150-201 Power Supply
The smartPanel Mount Package for iPhone 6 includes the smartPower 150-201 Single USB Power Supply to provide power to the mount and your iPhone! The smartPower 150-201 is a remote mounted Single USB type power / charging unit designed to mount behind the instrument panel to provide power to the mount. The smartPower 150-201 provides 2.7 amps at 5 VDC +/- 0.25 (10 watt) to keep your iPhone powered and charging through all phases of flight. The package also includes the Apple MFi Certified Lightning Cable and the 3.5mm Audio Cable.
Keep it cool.
As they are being used, iPhones generate heat that can affect performance — resulting in a high-temperature shut down when you might need it most! Pilots have found this out the hard way when using a temporary mounting solution like Velcro to attach their unit to the instrument panel. The smartPanel Mount was designed with cooling in mind. Each mount has a 5/8″ tapered hose / tube port built-in, allowing you to attach it to a standard avionics cooling fan. Each panel mounting tray features cooling channels to circulate air behind your iPhone to keep it cool even under the heaviest of use.
The smartPanel Mount is designed for easy installation in your panel. Each durable molded ABS plastic unit is self-contained and mounts with only four screws. Our installation drawings give you the exact panel cutout details and screw positions in either PDF or AutoCAD DXF for precise cuts. The smartPanel Mount for iPhone 6/7/8 requires a 5.477″ long and 3.025″ high panel cutout and can be mounted either horizontally or vertically.
The included smartPower 150-201 Single USB 2.7 amp power supply mounts directly behind the instrument panel close to the mount, simplifying installation even further!
Both the Lightning Cable and Audio Cable mount directly in the specially designed ports in the iPhone mount.
Mount in Automobiles, Boats, RVs, and Displays too!
Though the smartPanel Mount Package for iPhone 6/7/8 was designed for use in aircraft, the durable construction and well-designed flush mount can be used easily for a wide variety of applications — wherever there is a flat surface!
- Automobile – – A great custom dashboard mount for custom cars, auto restorations, or to incorporate into your own upgrade design to customize your car or truck. An easy way to add a clean and custom navigation display in any vehicle!
- Marine / Boats – The thin profile flush mount works well to create a custom bridge display in your boat, yacht, or watercraft for charts, weather, and navigation information. Mount in the wall of your cabin for a space-saving entertainment / communication / information system!
- Recreational Vehicles (RVs) and Campers – Create a custom mount in the wall of your trailer, RV, or mobile home to have a simple entertainment and communication system while saving space!
- Displays / Office / Home Use – An easy-to-install custom flush mount to add to trade show displays, retail kiosks, educational exhibits, home entertainment systems, and home management systems.
Panel Dock Specifications:
- Compatable with iPhone 6, iPhone 6S, iPhone 7, and iPhone 8
- Made of durable black ABS plastic
- Overall Dimensions: 7.62″ L / 3.66″ W / 0.94″ Deep
- Panel Cutout Dimensions: 5.477″ L / 3.025″ W
- 1 year Limited Warranty
- 60-day money-back guarantee
Power Supply Specifications:
- 2.7 amps (Output Current)
- Input Voltage: 9 – 48 VDC
- Output Voltage: 5 VDC +/- 0.25 (10 watt)
- Weight: 2.6 ounces
- Dimensions: 1.5″ W x 1.5″ H x 2.1″ D
- One year limited warranty
- smartPanel Mount for iPhone 6/6S/7/8 P/N 53-23
- smartPower 150-201 2.7 amp Power Supply with a Single power supply (Powers Mount only) P/N 75-11
- Apple MFi Lightning Cable with Open Wire Termination P/N 52-2
- 3.5mm Audio Cable with Open Wire Termination P/N 52-3
- D-Sub 15-pin Solder Connector P/N 25-2
- D-Sub Cable Shield P/N 25-36
Apple Model Numbers compatible:
- iPhone 8 (A1863, A1905)
- iPhone 7 (A1660, A1778, A1779, A1780)
- iPhone 6 (A1549, A1586, A1589)
- iPhone 6S (A1633, A1688, A1691, A1700)
Contact Cost Aero at 855-500-3044 for a complete system ordering assistance
Add Fan Blower Power Supply Voltage:
Add Crimp Connector Kit (Not applicable if Pre-wired is selected) [+$19.99]
There are no reviews yet.