Category – Instruments – Safety
E FIRE USA Extinguishing 6″ Ball (Bracket Included)
AV-20S Multi-Function Panel Display | 2.25in Display
Available for certified and experimental aircraft, the AV-20 transforms your flight panel without sacrificing simplicity. Designed to fit in a standard 2-inch instrument slot, this powerful backup solution provides critical flight data, a built-in clock, and customizable alerts—all in a sleek, easy-to-install package. The AV-20-S has an FAA NORSEE (Non-required Safety Enhancing Equipment) Approval.
PT-100GA – Pressure Transducer
PT-30GA – Pressure Transducer
AERO 452-201-010 Remote Mount CO Detector for use in factory OEM Garmin G1000/Perspective
AERO 551-101-002 Panel Mount Digital CO Detector
VI-2µFA SureFly Ignition Interface
VI-2µFA SureFly Interface Works with SureFly SIM4P Connect to the RPM input channel using E.I.’s VI-2µFA Use with EDC-33 (MVP
CGR-30P Premium Package
CGR-30P Premium Package (Single Display) Worksheet here: https://iflyei.com/downloads-electronics-international-instruments/ FAA Approved Primary Replacement Primary Replacement STC’d, TSO’d & PMA’d Remove your
A200-TSO Oil Temperature Sensor
The A200-TSO is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accuracy of +/- 0.5°C over the full operating range.
The output voltage is proportional to the temperature x the supply voltage (ratiometric). The output swings from 0.25 V at −50°C to +4.75 V at +150°C using a single +5.0 V supply.
The temperature transfer function is:
VOUT = (V+/5 V) × [1.375 V +(22.5 mV/°C) × TA]
Power requirements (when used with any 200 Series instrument) are 5V / 1mA.
The sensor has a 5/8-18 threaded body and includes a copper crush washer.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this temperature sensor is STC'd as a primary replacement.
A200-PSO Oil Pressure Sensor
The A200-PSO is a bulk micro-machined, gage type pressure sensor for use in both harsh and benign media with superior accuracy over an operating temperature of -40°C to 105°C. It has superb accuracy of +/- 0.5% full scale.
It contains a custom ASIC which provides signal conditioning for calibration and temperature compensation at the point of measurement. Each sensor is traceable to NIST calibration standards.
Power requirements are 5V / 10mA. Signal output is linear and varies from 0.5V (0 PSI) to 4.5V (200 PSI). Overpressure burst rating is 600 PSI.
The sensor has a 1/8" NPT threaded port for connection to the oil pressure line.
Supplied with a 36" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this pressure sensor is STC'd as a primary replacement.
M650
M650 FEATURES UNIT FOR TESTING BLIND ENCODERS ON TEST BENCH PRESSURE ALTITUDE AUTOMATIC DIMMING SUNLIGHT READABLE DISPLAY SPECIFICATIONS Pressure Altitude:
M655 Five Function Indicator
M655 FEATURES 2 1/4″ STANDARD MOUNT OR FRONT MOUNT OUTSIDE AIR TEMPERATURE (°F) OUTSIDE AIR TEMPERATURE (°C) PRESSURE ALTITUDE DENSITY
