MARC-70 Install Kit | D Sub Connector

$226.00
The 305061-00 is a 50 socket D Sub connector for use with installation of MARC-70 interface modules.

T-Bar Tool

$225.00

T-BAR tool

  • Includes everything you need to get popping panels right out of the box! 
  • Complimentary shipping on all orders in the Continental US. 
  • Ask about bulk pricing.
  • 100% limited lifetime warranty.
  • Order 2 or more and get a Richardson snapback hat!

3-Pin 28V Aircraft External Power Cable (802-683)

$225.00
8ft. AN2551 3-Pin aircraft external power cable (included with 2835A, 2835AB2, 2870A and 2870A-B2 Ground Power Units). Designed to connect an Enhanced Flight ground power unit to standard AN2552 external power receptacle found on most General Aviation aircraft. Rugged polycarbonate shell, assembled with stainless steel hardware. Torch-soldered heavy-duty copper contacts with silver plating. Up to 0 AWG wire. 50% more power handling. Up to 1600A peak.

RAMI AV-530 Airborne Communications | VHF

$222.95
The AV-530 is designed for broadband communications. The antenna has a die-cast aluminum base and a tapered stainless steel whip for less drag at higher airspeeds. It is supplied with a weather-sealing gasket and mounting hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 1.65 lb @ 250 mph. This antenna is a direct replacement for the CI 292-1.

Cable ACD-57 to Becker Radios (3ft)

$222.00

Interface cable to connect a Becker AR/RT-6201 VHF Radio to an ACD-57. Includes interface converter circuitry

Features
  • D-SUB 15HD Connector and backshell for ACD-57, preconfigured.
  • D-SUB 25 connector on the Becker side.
  • Includes interface converter circuitry.
Compatible with: ACD-57 Becker AR-6201, Becker RT-6201

RAMI AV-5 Base Station | VHF

$220.00
The AV-5 is an economical Ground Plane base station antenna for general aviation. It is ideally suited for use with Unicom transceivers and is field tunable to optimize VSWR at desired frequency. Durably constructed of high quality materials for a long operational life, the antenna is designed to withstand wind speeds up to 100 mph.

RAMI AV-586 Antenna Accessories | Coupler

$220.00
The AV-586 antenna coupler is a signal splitter providing two outputs from a single antenna. The necessity of bringing this product forward comes from advancing technology in avionics. Newer designed navigational radios have only one antenna input to receive all three (VOR/LOC/GS) signals whereas older legacy radios had a separate antenna input for the VOR/LOC signal and another antenna input for the GS signal. In an aircraft instrument panel with two newer navigational radios the AV-586 is the article that will provide the necessary signals to both radios utilizing a single antenna.

RAMI AV-571 Antenna Accessories | Diplexer, Splitter

$220.00
The AV-571 diplexer/splitter splits the signal from a VOR-Type antenna to feed two NAV and one Glide Slope receivers. The diplexer/splitter’s construction is similar to the AV-547 splitter and operates at altitudes up to 50,000 ft. This product is a direct replacement for the CI 505.

USB-6A Smart Charger

$220.00
USB-6A Smart Charger FAA Approved FAA STC’d, PMA’d Mounts in a 2-1/4″ hole Operates from 7.5 to 35 volts .1