D-150 Shielded Wire Splice | 26–20 AWG, Nickel, 3–4 Conductors
Contact Cost Aero at 855-500-3044 for pricing
D-150 solder sleeve splices provide encapsulation, strain relief, insulation, and simple inspections for splicing together one or two wires per end. The one-piece design makes installation simple and cost effective.
This D-150 solder splice will fit over 26 – 20 AWG cables with three or four nickel-plated conductors. Colored red.
Features
- Provides environment resistant seal
- One-to-one inline shielded splice
- Compatible with twisted pair, trio and quad cables with nickel-plated conductors
- 135°C minimum wire insulation rating
Specifications
AWG wire range:
26 AWG – 20 AWG
Dimensions:
4.170 x 157 in (105.92 x 4 mm)
Insulation Material:
Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride
Color Code:
Red
Solder Type:
Type Sn63 per ANSI J-STD-006
Flux Type:
Type ROM1 per ANSI J-STD-004
Crimp Splice:
Nickel-plated, copper alloy
Temperature Rating:
-55°C to 150°C
| Weight | .1 lbs |
|---|---|
| Dimensions | 10 × 8 × 6 in |
| Brand | TE Connectivity |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
RV-10 Products
Step Bushings – TCW’s custom Step Bushings solve the loosening of the entry steps over time. TCW’s Step Bushings are solid bushings that fit inside the step tube and give the bolt that holds the step to the step mount something substantial to grab onto.
Fuel Fittings – TCW’s custom Fuel Fittings adapt the standard AN bulkhead fittings to the 1” diameter pre-punched holes for the fuel line from the tunnel area out to the fuselage.
3.5mm Audio Cable for smartPanel Docks with Inline Resistor (Open Wiring) – 6 Foot
6 FT - 3.5mm Audio Cable / 4-wire Open Wiring Termination with Inline Resistor
To connect your smartPanel Mount to your audio panel to allow music / multimedia to be played through your intercom system or to allow your iPad or iPhone to be used as a recording device, you will need to add a 3.5mm audio cable to your panel mount. These cables have been designed to perfectly fit the built-in smartPanel Mount audio port position.
This audio cable is a straight open-wiring audio cable with an inline components to prevent feedback when wired to the audio panel.
Cable Apple MFi Cert. Lightning to USB-A Male 1.1M (3.6Ft) Black
Designed to fit smartPower power supplies 150/250.
Apple approved lighting to USB-A Male used to connect to smartPower 150/250 power supplies to assure your iPad or iPhone remains powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The USB cable can be installed directly on a smartPower 150/250 series USB power supplies.
Reviews
There are no reviews yet.