MOX 602 Self Fusing Silicone Tape | Red w/ Blue Guideline, Triangular, 12 yards
$23.93
MOX-Tape 600-T Triangular Series Tape is produced in the form of a triangular cross section with a colored guideline running along the peak of the triangle. The guideline facilitates winding of the tape so minimum overlapping is obtained while maximum physical and electrical properties are retained. The tape is interleaved with a quick release film. It is self-bonding and self-fusing. After curing at room temperature for 24 hours, the tape forms an inseparable silicone layer that must be cut for removal.
This tape is red with a blue guideline, is 1 inch wide, 0.020 inch thick, and comes in a 12 yard roll.
Features
- Resists moisture, oxygen, and ozone to assure continuous high insulation values.
- Conforms smoothly when wrapped around complex forms.
- Bonds at room temperature into a single inseparable layer after 24 hours.
- Remains non-tacky to the touch and does not adhere to other surfaces, or substrates.
- Insulates to specified value with single layer of heavier tape, thereby reducing labor time and cost.
- Resists vibration, heat, and mechanical shock as well as cavitation under corona and electrical fatigue.
- MOX-Tape is inherently flame retardant and when burned forms a non-conductive insulating ash.
- SA & SB MOX-Tapes provide a uniform thickness even around sharp edges dielectric strength remains constant.
- Glass cloth encapsulated inside the silicone rubber prevents wicking and maintains high insulation resistance under the highest humidity conditions.
- Controlled stretch tapes provide a uniform voltage barrier.
- All MOX-Tapes are protected by polyester interleaving.
Specifications
Width:
1.0 in
Thickness:
0.020 in
Roll Length:
12 yd
Color:
Red
Dielectric Strength:
450 VPM Minimum
Shore A Hardness:
50 ± 10
Tensile Strength:
700 psi (min)
Elongation at Break:
350% (min)
Temperature Range:
-65° to 500°F
Volume Resistivity:
1013 Ω/cm (min)
Tackiness:
2 P.P.I
Military Specification:
A-A-59163 Cl I, Ty II, DMS 2186 Ty II, GE 3003M70PO1, MIL-I-46852C Type II, RMS 315 Ty II
| Brand | Arlon |
|---|
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
Cable Panel Mount USB-A & USB-C Female 1.1M (3.6Ft) 4-Wires Solder Terminations Black
Cable panel mount USB-A & USB-C female 1.1M (3.6 Feet) 4 open wires solder terminations with drain wire black. Cable functionality requires smartPower USB Power Supply (any USB 250 Series).
Features:
Cable Panel Mount USB-A Female 1.1M (3.6Ft) 4-Wires Solder Terminations Black
Designed to fit smartPower power supplies 150/250.
Apple approved lighting to USB-A Female used to connect to smartPower 150/250 power supplies. All our Lightning cables are Apple MFi certified for full compatibility. The USB cable can be installed directly on a smartPower 150/250 series USB power supplies.
Cable Apple MFI Cert. Lightning 0.4M (1.3Ft) 4-Wires Solder Termination Black
Designed to fit smartPower power supplies 150-301.
Apple approved lighting cable open 4 wire used to connect to smartPower 150-301 power supplies to assure your iPad or iPhone remain powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The open wiring termination allows these cables to be installed directly behind on a smartPower 150-301 series USB power supplies.
Reviews
There are no reviews yet.