SAFE 328 Avionic Cooling Fan | 3 Ports, 28 Volts
$665.00
The SAFE 328 Avionics Cooling Fan simultaneously cools up to three avionics units. The SAFE 328 is capable of suppling up to 20 CFM of air flow — helping to keep avionics at their proper operating temperature. Fault protection is also provided; when the RPM’s drop below a pre-defined threshold, the SAFE 328 sends and alert indicating a fault has occurred. High quality, brushless motors are used providing RunQuiet technology for quiet operation. This FAA PMA unit surpasses the stringent environmental testing ensuring years of reliables service.
The SAFE 328 Avionics Cooling Fan simultaneously cools up to three avionics units. The SAFE 328 is capable of suppling up to 20 CFM of air flow — helping to keep avionics at their proper operating temperature. Fault protection is also provided; when the RPM’s drop below a pre-defined threshold, the SAFE 328 sends and alert indicating a fault has occurred. High quality, brushless motors are used providing RunQuiet technology for quiet operation. This FAA PMA unit surpasses the stringent environmental testing ensuring years of reliables service.
Features
The SAFE 328 includes:
- The SAFE 328 cooling fan
- Installation kit
- Mating connector & pins
Features:
- Cools up to three avionic units
- Provides up to 20 CFMs of air flow
- Fault indication when the fan RPMs drop below 65 percent
Specifications
Weight:
0.7 lb
Dimensions:
1.25 x 5.58 x 4.75 in
Voltage:
22 – 31 VDC, operational
Current:
0.4 A, nominal
0.55 A, start up
Air Flow (All Ports):
20 CFM, no static pressure (10 CFM @ 0.08 H2O Static Pressure)
Operating Temperature:
-20°C to 55°C
Altitude:
55,000 ft, maximum
Mounting:
Mounts with three #6-32 or #8-32 or equivalent machine screw
System Includes:
SAFE 328 Fan (305467-00)
Installation Kit (305477-00)
Mating Connector (305479-03)
Mating Pins (305478)
Certification:
FAA-PMA: PQ0894SW Diamond DA40
DO 160D: [F1]BAA[S2R2U(F,B2,M)]XXXXXXZBAZA[XX]M[XXXX][XX]XX
| Weight | .1 lbs |
|---|---|
| Dimensions | 10 × 8 × 6 in |
| Brand | Sandia Aerospace |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally. Â
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more.  Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
A200-TSO Oil Temperature Sensor
The A200-TSO is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accuracy of +/- 0.5°C over the full operating range.
The output voltage is proportional to the temperature x the supply voltage (ratiometric). The output swings from 0.25 V at −50°C to +4.75 V at +150°C using a single +5.0 V supply.
The temperature transfer function is:
VOUT = (V+/5 V) × [1.375 V +(22.5 mV/°C) × TA]
Power requirements (when used with any 200 Series instrument) are 5V / 1mA.
The sensor has a 5/8-18 threaded body and includes a copper crush washer.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this temperature sensor is STC'd as a primary replacement.
A200-HAS Hall Effect Current Shunt
The A200-HAS is an economical and precise solution for DC current measurement in electrical systems up to +/- 100A in capacity.
The output of the device has a positive slope (Vcc / 2) when an increasing current flows through the primary copper conduction path. The internal resistance of this conductive path is 130 µΩ typical, providing low power loss.
The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor leads and provide a minimum isolation of 3,000V.
Current sense response time is 3uS.
Power requirements are 3V @ 10mA. Signal output is linear and varies from 0.0V (-100A) to 3.0V (+100). Zero current is represented by 1.5V.
The sensor has two 1/4" terminal posts for connection to the power bus.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this current sense shunt is STC'd as a primary replacement.
Instrument Intensity Potentiometer – Rev 02
Instrument Intensity Potentiometer - Rev 2 - 5 Instruments ONLY
NOTE: This item is only required for use on products purchased on or AFTER 03-JAN-2013.
This potentiometer will support up to ten instruments in a single installation. It provides infinitely variable, uniform intensity control for all instruments.
These units are TSO qualified with all 200 Series instruments and is STC'd as a primary replacement instrument component under all flight conditions (day/night VFR and IFR).
Reviews
There are no reviews yet.