smartPanel Mount Package for Apple iPhone 6+, 6S+, 7+, and 8+.
For Both FAA Certified and Experimental Aircraft – Includes Panel Mount, 250-301 2.7 Amp Power Supply to Power Mount Plus Add a Single Panel USB Port, Lightning Cable, and 3.5mm Audio Cable
Full Package Includes:
- smartPanel Mount for iPhone 6+/6S+/7+/8+
- smartPower 250-101 2.7 amp Power Supply with a Single USB-A Port (Powers Mount and USB Port)
- Apple MFi Lightning Cable with Open Wire Termination
- 3.5mm Audio Cable with Open Wire Termination
- D-Sub 15-pin Solder Connector
- D-Sub Cable Shield
The smartPanel Mount Package for Apple Apple iPhone 6+, 6S+, 7+, and 8+ is a flush mounting system to easily dock and seamlessly integrate your existing Apple iPhone 6+, 6S+, 7+, 8+ into your aircraft instrument panel, giving it a clean, professional appearance in an easy to view position! Once installed, the smartPanel mount allows your iPhone to be docked in seconds, fully powered and ready for use, and able to be removed in seconds when done!
This package gives you the mount along with a panel mounted single 2.7 amp USB-A port that also features a hard-wired 2.7 amp connection from the rear to power the iPhone mount! This way you can provide power to an external component like a phone or GPS/ADS-B receiver while keeping your iPhone charged! Choose from a Single USB Round Faceplate or Single USB Square Faceplate.
The package also includes the Lightning cable to power the iPhone, a 3.5 mm audio cable with an open-wiring termination to hard wire to an audio panel as well as the 15-pin D-Sub connector to solder power in/out and a D-Sub cable shield.
If you were to buy all the components in this package on their own, you would spend $479 — at $379, this money-saving package includes everything you will need to install and integrate the iPhone 6+ / 6S+ / 7+ / 8+ with your aircraft – panel mount, 2.7 amp power supply with a panel USB-A port, and power and audio cables included.
The smartPanel Mount allows you to transform your new or existing panel and use the larger iPhone 6+/7+/8+ line in the cockpit, fully integrated with your instrument panel. Your navigation and communication information is easily accessible with the many popular iOS aviation apps available.
Now Approved for FAA Certified Part 23 Aircraft and Part 27 and 29 Rotorcraft
All smartPanel Mounts and Power Supplies from Guardian Avionics are approved for installation in certified aircraft and rotorcraft under 14 CFR Part 23, 27 and 29 as “Non-Required Safety Enhancing Equipment” (NORSEE) as outlined in FAA memorandum number PS-AIR-21.8-1602. Mounts and power supplies may be installed as a minor alteration. Please refer to this link for the Guardian Avionics NORSEE Letter of Authorization.
Designed for General Aviation in mind.
The smartPanel Mount for iPhone 6+, 6S+, 7+, and 8+ was designed by aerospace engineers to perform in the unique environment of the cockpit. The spring actuated mounting cradle securely holds the iPad in place during the roughest of turbulence. The clean, flush mount has a shallow chassis allowing it to be easily installed in even the smallest of instrument panels. Built-in ports for the included Apple Lightning cable and 3.5mm audio cable in the package will keep cables safely and securely positioned behind the panel, allowing you the ability to connect to power, data, and audio without the cord mess.
Packaged with smartPower 250-101 Power Supply
The smartPanel Mount Package for iPhone 6+, 6S+, 7+, and 8+ includes the smartPower 250-101 Dual 2.7 amp Power Supply to provide power to the mount and your iPhone 6, 6S, 7+, and 8+ along with a USB-A port in the panel! The smartPower 250-101 converts all aircraft voltages from 9 to 48 volts (including common 12, 14, and 24 volt systems) and transforms it to 5 VDC at 2.7 amps (12 watt) to keep your iPhone 6+, 6S+, 7+, and 8+ powered and charging through all phases of flight as well as another product via the panel port.
Keep it cool.
As they are being used, iPhones generate heat that can affect performance, resulting in a high-temperature shut down when you might need it most! Pilots have found this out the hard way when using a temporary mounting solution like Velcro to attach their unit to the instrument panel. The smartPanel Mount was designed with cooling in mind. Each mount has a 5/8-in tapered hose / tube port built-in, allowing you to attach it to a standard avionics cooling fan. Each panel mounting tray features cooling channels to circulate air behind your iPhone to keep it cool even under the heaviest of use.
The smartPanel Mount is designed for easy installation in your panel. Each durable molded ABS plastic unit is self-contained and mounts with only four screws. Our installation drawings give you the exact panel cutout details and screw positions in either PDF or AutoCAD DXF for precise cuts. The smartPanel Mount for iPhone 6+, 6S+, 7+, 8+ requires a 6.253″ long and 3.442″ high panel cutout and can be mounted either horizontally or vertically.
Mount in Automobiles, Boats, RVs, and Displays too!
Though the smartPanel Mount Package for iPhone 6+, 6S+, 7+, 8+ was designed for use in aircraft, the durable construction and well-designed flush mount can be used easily for a wide variety of applications — wherever there is a flat surface!
- Automobile – – A great custom dashboard mount for custom cars, auto restorations, or to incorporate into your own upgrade design to customize your car or truck. An easy way to add a clean and custom navigation display in any vehicle!
- Marine / Boats – The thin profile flush mount works well to create a custom bridge display in your boat, yacht, or watercraft for charts, weather, and navigation information. Mount in the wall of your cabin for a space-saving entertainment / communication / information system!
- Recreational Vehicles (RVs) and Campers – Create a custom mount in the wall of your trailer, RV, or mobile home to have a simple entertainment and communication system while saving space!
- Displays / Office / Home Use – An easy-to-install custom flush mount to add to trade show displays, retail kiosks, educational exhibits, home entertainment systems, and home management systems.
Panel Dock Specifications:
- Made of durable black ABS plastic
- Overall Dimensions: 8.288″ L / 4.083″ W / 1.09″ Deep
- Panel Cutout Dimensions: 6.253″ L / 3.442″ W
- 1 year Limited Warranty
- 60-day money-back guarantee
Power Supply Specifications:
- 2.7 amps (Output Current)
- Input Voltage: 9 – 48 VDC
- Output Voltage: 5 VDC +/- 0.25 (12 watt)
- Weight: 2.6 ounces
- Dimensions: 1.5″ W x 1.5″ H x 2.1″ D
- Single USB Round Faceplate 0.9-in diameter
- One year limited warranty
- smartPanel Mount for iPhone 6+/6S+/7+/8+ P/N 52-24
- smartPower 250-101 2.7 amp Power Supply with a Single USB-A Port (Powers Mount and USB Port) P/N 75-4
- Apple MFi Lightning Cable with Open Wire Termination P/N 52-2
- 3.5mm Audio Cable with Open Wire Termination P/N 52-3
- D-Sub 15-pin Solder Connector P/N 25-2
- D-Sub Cable Shield P/N 25-36
Apple Model Numbers compatible:
- iPhone 8+ (A1897,A1864)
- iPhone 7+ (A1786, A1785, A1784, A1661)
- iPhone 6+ (A1593, A1524, A1522)
- iPhone 6S+ (A1699, A1690, A1687, A1634)
Contact Cost Aero at 855-500-3044 for a complete system ordering assistance
Add Fan Blower Power Supply Voltage :
Add Crimp Connector Kit (Not applicable if Pre-wired is selected) [+$19.99]
There are no reviews yet.