SAC 7-35 Air Data Computer
The SAC7-35 Airdata Computer for General Aviation is actually four systems in one; it provides an altitude encoder, altitude alerting, fuel flow, and air data computer. SAC 7-35 is an FAA TSO approved altitude encoder that provides RS-232 for newer generation transponders as well as standard Gilham Grey code for legacy transponders. The system is also equipped with SANDIA’s altitude inflight monitoring (AIM) that alerts pilots whenever the aircraft deviates 100 feet or more from selected altitude. When paired with a fuel flow transducer, the SAC 7-35 provides all the fuel flow data required for navigation systems to monitor fuel flow. The SAC 7-35 is also a fully TSO’s airdata computer with multiple interface formats that provide data to a wide variety of avionics systems.
SAC 7-35 Air Data Computer | ADS-B for Garmin 400W/500W
SAE 5-35 Altitude Encoder | RS232, 35,000 ft
The SAE 5-35 altitude encoder provides accurate altitude data by combining altitude encoding, digital altitude on two RS-232 outputs, and altitude inflight monitoring (AIM) into a single compact and reliable unit. The SAE 5-35 provides Gillham Grey Code to the aircraft’s Mode C transponder using innovative pressure circuitry that greatly reduces warm up time. This unit provides altitude data from -1,000 to 35,000 feet — ideal for installations in piston, turbine, and jet aircraft.
SAFE 328 Avionic Cooling Fan | 3 Ports, 28 Volts
The SAFE 328 Avionics Cooling Fan simultaneously cools up to three avionics units. The SAFE 328 is capable of suppling up to 20 CFM of air flow — helping to keep avionics at their proper operating temperature. Fault protection is also provided; when the RPM's drop below a pre-defined threshold, the SAFE 328 sends and alert indicating a fault has occurred. High quality, brushless motors are used providing RunQuiet technology for quiet operation. This FAA PMA unit surpasses the stringent environmental testing ensuring years of reliables service.
Safe-T-Cable Assembly | 0.022 x 18 in, 50 qty
Safe-T-Cables provide threaded fasteners that extra bit of safety for applications in high vibration and kinetic energy environments, or in situations where a higher level of reliability is required. While designed to restrict unintentional movement of fasteners, Safe-T-Cable also removes the awkward and costly installation procedures of traditional safety wire as well as the demanding inspection processes — common in modern airframe and engine systems. Safe-T-Cable is constructed of a stranded cable with a high tensile strength and retains a higher degree of flexibility over regular safety wire.
This Safe-T-Wire assembly has a diameter of 0.022 inches and a length of 18 inches. Package of 50.
SAFE-T-CABLE DIAGONAL WIRE CUTTERS
Safe-T-Cable Nose Assembly | 3-inch, For 0.032-inch Safe-T-Cable Assemblies
Safe-T-Cable nose assemblies rotate 360° and are available in 1”, 3”, 5”, 7”, and 9” lengths. Low-profile noses are available for applications where the clearance between the fastener head and the surface to which the fastener is attached is limited. Elongated ferrules are recommended for use with low-profile noses.
This Safe-T-Cable nose assembly is 3 inches long and is for use with 0.032-inch Safe-T-Cable assemblies.
