USB-C To USB-C Premium Cable (4ft)
The Premium Cable's 4 foot range liberates you from the wall socket and gives you the freedom to charge and use your device in comfort. Roll up excess cable and secure it with the integrated leather strap for a tangle-free and tidy home. Perfect for traveling, home or office.
NOTE: Compatible with all USB-C devices
V/UHF Broadband and UHF SatCOM Antenna | 30-80MHz, 108-152MHz, 240-400MHz
The 19-440-10 V/UHF Broadband and UHF SatCOM Antenna is a combined broadband VHF/UHF communications and UHF satellite communications antenna. The 19-440-10 comprises two orthogonally mounted elements, a circularly polarized turnstile antenna and a vertically polarized broadband fan monopole. Low angle coverage is provided by the vertical element, and high angle coverage is provided by the circularly polarized element. In this way, essentially full hemispheric coverage is achieved for satellite communications.
VA-1A Volts/Amps
VA-1A Volts/Amps FAA Approved Instrument FAA STC’d as a Primary Replacement. Upgrade your aircraft panel with the most precise
Select options
This product has multiple variants. The options may be chosen on the product page
Vans RV-8 Flex Bolted Quick Release
Finally, a solution for mounting your iPad in the Vans RV-8 cockpit!
These concentric rings suit the Vans RV-8, mounted through the 2" lightening hole in the 4130 steel windshield bow gusset to attach a MyGoFlight quick release base on the port or starboard (or both) sides of the cockpit. Together they form a strong, vibration free and convenient installation. A handy alternative to an iPad knee-mount that typically interferes with the controls. Each kit comes complete with four M4 x 16mm stainless screws.
Select options
This product has multiple variants. The options may be chosen on the product page
Variable Intensity Lighting Controller
Variable Intensity Lighting Controller - REV 1 Instrument ONLY
NOTE: This item is only required for use on products purchased BEFORE 03-JAN-2013
ONLY USE THIS ITEM TO REPLACE AN EXISTING REV A UNIT IF IT HAS FAILED.
Products manufactured after this date have this unit INCLUDED and are connected to the panel lighting system or a separate potentiometer.
The A200-DDC Intensity Controller will support up to ten Rev 1 instruments in a single installation. It provides infinitely variable, uniform intensity control for all instruments.
These units are TSO qualified with all 200 Series instruments and is STC'd as a primary replacement instrument component under all flight conditions (day/night VFR and IFR).
VEHICLE ANTENNA 108/512MHz/ W/17′ RG58/UHF MALE CONNECTOR
The ASPC-201L is a field-tunable, broadband vehicle antenna with a snap-in mount for fast, permanent installation in a 3/8-inch hole without the need for soldering. The whip is fastened using a set screw adapter and can be removed easily for fine tuning or replacement.
- Comes with 17-foot RG58U cable and UHF male connector
VEHICLE MOUNT ANTENNA/Field tunable, 118-940MHz, 1/4.
Vehicular Antenna | SATCOM | Tan
The RAMI8711 is an extremely rugged UHF SATCOM antenna with Right Hand Circularly Polarized (RHCP) designed for tactical vehicles for on the move (OTM) applications. The low profile design reduces interference from overhanging objects and has a low visual signature. The antenna has the frequency coverage to support both Legacy and MUOS UHF communication needs and can cover the entire hemispherical Field of View (FOV) with a single output port which eliminates the need to switch between high and low angles. The antenna has been designed to interface with a standard NATO mount and can be elevated on a riser if needed.
Vent Port Kit
This kit includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
