Variable Intensity Lighting Controller

Variable Intensity Lighting Controller – REV 1 Instrument ONLY

NOTE: This item is only required for use on products purchased BEFORE 03-JAN-2013

ONLY USE THIS ITEM TO REPLACE AN EXISTING REV A UNIT IF IT HAS FAILED.

Products manufactured after this date have this unit INCLUDED and are connected to the panel lighting system or a separate potentiometer.

The A200-DDC Intensity Controller will support up to ten Rev 1 instruments in a single installation. It provides infinitely variable, uniform intensity control for all instruments.

These units are TSO qualified with all 200 Series instruments and is STC’d as a primary replacement instrument component under all flight conditions (day/night VFR and IFR).

Certification / Compliance
TSO (various per instrument)
Canadian STC
FAA STC
Certified as primary replacement

Environmental
DO-160F A1CAASXXXXXXZBXXBBBCSBA1C11XXAX

DC Power Source
Input voltage 6 to 36 VDC
Power consumption 250mA (maximum brightness)
Load dump tolerance +60V
Direct spike tolerance +/- 60V
Cable spike tolerance > +/- 1KV

Operating Temperature
Constant operating -15ºC to +55ºC
Short term operating (1hr) -40ºC to +70ºC
Storage -55ºC to +85ºC

Signal Output
10.2V to 13.6V with 6.0V to 36V input

Dimensions
1.1″ diameter with 1/4″ mounting hole

Weight (excluding harness)
1.3 oz, including 3′ wiring