Category – Airframe Parts – Antennas

The CI 211series antenna are high speed bent blade antennas designed as a low profile, top or bottom mount for large twins and medium jet aircraft. Skydrol and rain erosion resistant. The CI 211-1 & CI 211-16 have an extended frequency band (118 MHz to 154 MHz). The CI 211-L and CI 211-1L are equipped with leading edge protection.

The CI 119 is a high-speed blade antenna designed for a large single- or twin-engine aircraft. The antenna assemble is enclosed in aerodynamically shaped, injection molded polyester glass shell with internal components foamed in place mechanical integrity. Featuring reduced height for mounting on top or bottom of aircraft.

The CI 268-60 ComDat VHF antenna uses the same radome as other multi-function ComDat antennas from Cobham. It has a super tough, nickel-plated aluminum base plate with integral Nitrile ‘O’ ring that can be used in pressurized applications. The CI-268-60 shares the same footprint and offset connector location as the popular CI-238. The unit also features a unique built-in notch filter that allows installation in close proximity to GPS antennas without cosight interference.

The CI 248-5 is designed for the Cessna 182 and 182T aircraft and offers lower drag. It is designed for single engine and helicopter application and meets the rigorous requirements of RTCA DO-160D. The CI 248-5 can be install in close proximity to GPS antennas with its builtin harmonic suppression filter.

The CI 291 features a high strength fiberglass “stick” radiator and die-cast three-hole mount aluminum base. This antenna has been re-tested and updated to meet RTCA DO-160D environmental requirements while offering 118 MHz to 137 MHz frequencies associated with DO 186 MOPS.

The C70 series VHF communications antennas are designed for top or bottom installations on high-performance, single or twin, and turbo engine for fixed and rotary wing aircraft. The C70 series antennas offer mechanical strength and high-electrical efficiency to provide reliability at full 360/720 channel transceiver operations. Its lightweight profile is unobtrusive, resistant to icing, and offers a low drag profile.

The C70 series VHF communications antennas are designed for top or bottom installations on high-performance, single or twin, and turbo engine for fixed and rotary wing aircraft. The C70 series antennas offer mechanical strength and high-electrical efficiency to provide reliability at full 360/720 channel transceiver operations. Its lightweight profile is unobtrusive, resistant to icing, and offers a low drag profile. The C70-3 is directly interchangeable with C598501-0104, VF 10-210, CI 109, and CI 121

The C70 series VHF communications antennas are designed for top or bottom installations on high-performance, single or twin, and turbo engine for fixed and rotary wing aircraft. The C70 series antennas offer mechanical strength and high-electrical efficiency to provide reliability at full 360/720 channel transceiver operations. Its lightweight profile is unobtrusive, resistant to icing, and offers a low drag profile. The C70-4 supersedes the C70-2 and is specifically designed for bottom installations and designed with a higher degree of efficiency

The C60 series is a vertically polarized VHF communications antenna designed to by mounted either top or bottom of an aircraft. The electrical elements are completely sealed by foamed-in-resin with an outer fiberglass housing resulting in rugged construction that can be used in commercial and general aviation aircraft.

The C63 series VHF communication antennas are designed with a high mechanical strength and have machine tapered aluminum alloy radiating elements. The C63 series antennas are available in both top mount designs and bent-back, low-profile bottom mount designs and are well suited for helicopter installations.

• C63 series antennas are supplied with a gasket and a double plate