Category – Instruments – All
CO Guardian 353D-101 Panel Mount CO Detector for Dynon SkyView
Panel Mounted CO Detector for Experimental/Homebuilt Aircraft with Cabin Pressure Warning for Dynon SkyView
CO detector comes with a solder cup connector.
CO Guardian 353D-201 Remote Mount CO Detector for Dynon SkyView
Remote Mounted CO Detector for Experimental/Homebuilt Aircraft with Cabin Pressure Warning for Dynon SkyView
CO detector comes with a solder cup connector.
smartPanel Mount and Power Supply Package for 7th – 9th Generation Apple iPad
Contact Cost Aero at 855-500-3044 for a complete system ordering assistance
Add Trim Bezel ($49.99 Value) [+$35.00]
Power supply pre wired? [+$49.99]
6 FT - 3.5mm Audio Cable / 4-wire Open Wiring Termination with Inline Resistor [+$24.99]
Add Crimp Connector Kit? [+$19.99]
smartPanel Mount and Power Supply Package for Apple iPad Pro 10.5-in & iPad Air 3rd Gen (Apple Lightning Cable)
Contact Cost Aero at 855-500-3044 for a complete system ordering assistance
Add Trim Bezel ($49.99 Value) [+$35.00]
6 FT - 3.5mm Audio Cable / 4-wire Open Wiring Termination with Inline Resistor [+$24.99]
Add Crimp Connector Kit (Not applicable if Pre-wired is selected) [+$19.99]
smartPanel Mount and Panel USB Port Package for Apple iPad Mini 6
smartPanel Mount Package for Apple iPad Mini 6 For Both FAA Certified and Experimental Aircraft – Includes Panel Mount, 250-301
smartPanel Mount and Panel USB Port Package for Apple iPad Air 1, Air 2, Pro 9.7-in, and iPad (2017,2018)
smartPanel Mount Package for Apple iPad Air, Air 2, Pro 9.7-in, and iPad (2017/2018). For Both FAA Certified and Experimental
M307FCE-GRN Digital Temperature Gauge
M307FCE Digital Temperature Gauge
SC-5 Super Clock
M303 Series Outside Air Temperature and Voltage Indicator | Front Mount
E-1 Single EGT Instrument
A200-HAS Hall Effect Current Shunt
The A200-HAS is an economical and precise solution for DC current measurement in electrical systems up to +/- 100A in capacity.
The output of the device has a positive slope (Vcc / 2) when an increasing current flows through the primary copper conduction path. The internal resistance of this conductive path is 130 µΩ typical, providing low power loss.
The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor leads and provide a minimum isolation of 3,000V.
Current sense response time is 3uS.
Power requirements are 3V @ 10mA. Signal output is linear and varies from 0.0V (-100A) to 3.0V (+100). Zero current is represented by 1.5V.
The sensor has two 1/4" terminal posts for connection to the power bus.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this current sense shunt is STC'd as a primary replacement.
M800 Series Digital Clock | 5V Lighting, Illuminated Buttons, Keep-Alive Memory Battery, Black
M800 Series Digital Clock | 14V Lighting, Illuminated Buttons, Keep-Alive Memory Battery, Black
307FCI Digital OAT & Cabin Temperature Gauge | Centigrade, Green Display, Includes Digital Probe
