Category – Instruments – All
smartPanel Mount and Panel USB Port Package for Apple iPhone X
Contact Cost Aero at 855-500-3044 for a complete system ordering assistance
Add Trim Bezel ($39.99 Value) [+$28.00] Power supply pre-wired [+$49.99] Add Crimp Connector Kit (Not applicable for Pre Wired) [+$19.99]
Select options
This product has multiple variants. The options may be chosen on the product page
smartPanel Mount and Panel USB Port Package for Apple iPhone 6+, 6S+, 7+ & 8+
Contact Cost Aero at 855-500-3044 for a complete system ordering assistance
Add Fan Blower Power Supply Voltage : 14V [+$50.00] 28V [+$50.00] Add Crimp Connector Kit (Not applicable if Pre-wired is selected) [+$19.99]
Select options
This product has multiple variants. The options may be chosen on the product page
A200-PMP Manifold Pressure Sensor
The A200-PMP is a bulk micro-machined, absolute type pressure sensor for use in both harsh and benign media with superior accuracy over an operating temperature of -40°C to 105°C. It has superb accuracy of +/- 0.5% full scale.
It contains a custom ASIC which provides signal conditioning for calibration and temperature compensation at the point of measurement. Each sensor is traceable to NIST calibration standards.
Power requirements are 5V / 10mA. Signal output is linear and varies from 0.5V (0 PSI) to 4.5V (50 PSI). Overpressure burst rating is 300 PSI.
The sensor has a 1/8" NPT threaded port for connection to the manifold pressure line.
Supplied with a 36" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this pressure sensor is STC'd as a primary replacement.
A200-PSO Oil Pressure Sensor
The A200-PSO is a bulk micro-machined, gage type pressure sensor for use in both harsh and benign media with superior accuracy over an operating temperature of -40°C to 105°C. It has superb accuracy of +/- 0.5% full scale.
It contains a custom ASIC which provides signal conditioning for calibration and temperature compensation at the point of measurement. Each sensor is traceable to NIST calibration standards.
Power requirements are 5V / 10mA. Signal output is linear and varies from 0.5V (0 PSI) to 4.5V (200 PSI). Overpressure burst rating is 600 PSI.
The sensor has a 1/8" NPT threaded port for connection to the oil pressure line.
Supplied with a 36" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this pressure sensor is STC'd as a primary replacement.
400 Series Voltage & Dual Amperage Meter | 2-1/4 Mount, 28V Orange Lighting
400 Series Voltage & Dual Amperage Meter | 2-1/4 Mount, 14V Orange Lighting
400 Series Voltage & Dual Amperage Meter | 2-1/4 Mount, 5V Orange Lighting
D811C Pilot Desk Clock
B-11-2 Air Temperature Probe
M475VA Digital Voltmeter
M475VA, VAA Features LOW CURRENT DRAIN .001 AMP PLUS OR MINUS 150.0 AMP RANGE 8 to 32 VOLT D.C. RANGE
Select options
This product has multiple variants. The options may be chosen on the product page
