Category – Instruments – Safety
AERO 551-101-002 Panel Mount Digital CO Detector
AERO 551 Panel Mount Digital CO Detector and Cabin Pressure Warning
CO detector comes with a solder cup connector.
AERO 553-101-001 Panel Mount Digital Multi-Function CO Detector
Panel CO Detector with Digital Clock / Timer & Cabin Pressure Warning
AERO 452-201-098 Harness for 452-201-001 to -009 Replacement
AERO 452-201-099 Harness for 452-201-001 to -004 Replacement
Panel Mount CO Detector 2.25-in Instrument Adapter
A simple adapter plate to install a Guardian Avionics panel mounted Carbon Monoxide detector (CO detector) into a standard 2.25 (2 1/4) inch instrument position. Comes with four installation screws and two countersunk screws to install the CO detector into the adapter.
Crimp Connector kit for 353, 451, 452 , 454, and 455 CO detectors
Crimp Connector kit for 551/553/55 CO detectors
CO Alert & Reset/Test Switch
AERO 452-201-012 Remote Mount CO Detector for Dynon SkyView HDX
AERO 452-201-012 Remote Mount CO Detector for Dynon SkyView HDX The CO Guardian 452-201-012 remote mounted Carbon Monoxide (CO) detector
CO Guardian 453-101 Panel Mount CO Detector with Bluetooth
CO Guardian 453-201 Remote Mount CO Detector with Bluetooth
CO Guardian 354 Remote Mount CO Detector with Bluetooth
CO Guardian 354-101 Panel Mount CO Detector with Bluetooth
A200-TSA Outside Air Temperature Sensor
The A200-TSA is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accuracy of +/- 0.5°C over the full operating range.
The output voltage is proportional to the temperature x the supply voltage (ratiometric). The output swings from 0.25 V at −50°C to +4.75 V at +150°C using a single +5.0 V supply.
The temperature transfer function is:
VOUT = (V+/5 V) × [1.375 V +(22.5 mV/°C) × TA]
Power requirements are 5V / 1mA.
The sensor has a 5/16-24 threaded body and is supplied with two nylon mounting washers and a Nyloc fastening nut.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this temperature sensor is STC'd as a primary replacement.
Classic Scanner
The J.P.I. Classic Scanner® is perfect for any plane, especially for those pilots with a smaller budget. We have been making the Scanner® for over 20 years, and its proven reliance and durability compares with no other on the market.
M301 Digital Temperature Gauge
M301 Features FAHRENHEIT OR CELSIUS MINIMUM PANEL SPACE LIGHT WEIGHT AUTOMATIC DIMMING MINIATURE REMOTE PROBE SUNLIGHT READABLE DISPLAY LASER ENGRAVED
