A200-HMS – Slick/Unison Rotational Speed Sensor
The A200-HMS is an Hall Effect rotational speed sensor. It provides a speed accuracy of 1 RPM when used in conjunction with the TM200 instrument.
The output signal is a latched, pulse width modulated square wave output of 0V to a maximum of 30V, proportional to rotational speed.
Power requirements are 3.8V to 30V / 3mA.
Precision machined from 6061 T6 aircraft grade aluminum, this sensor is designed to thread into the vent hole of Slick/Unison unpressurized magnetos.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this speed sensor is STC'd as a primary replacement.
Model 450A Digital Voltmeter | White LED Display, Remote Sensing
Model 450A Digital Voltmeter | Green LED Display, Remote Sensing
Model 450A Digital Voltmeter | Amber LED Display, Remote Sensing
M450 Digital Voltmeter
M450 FEATURES MINIMUM PANEL SPACE LIGHT WEIGHT AUTOMATIC DIMMING SUNLIGHT READABLE DISPLAY LASER ENGRAVED FACEPLATE VOLTAGE WITH FLASHING ALARM FAA-PMA
TRIG Transponder – Wiring Harness
WIRING HARNESSES Using high quality materials, Trig harnesses are fully tested, quality controlled and will provide you with a reliable,
7271-3 Series Circuit Breaker | 30 Amp Rating, Push Button
M800R Remote Digital Clock Chronometer | 28V, Orange Lighting | Remote Unit
RAMI AV-587 Antenna Accessories | Diplexer, Splitter
Trans-Cal Altitude Encoder SSD120-35C-RS232
A200-TSA Outside Air Temperature Sensor
The A200-TSA is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accuracy of +/- 0.5°C over the full operating range.
The output voltage is proportional to the temperature x the supply voltage (ratiometric). The output swings from 0.25 V at −50°C to +4.75 V at +150°C using a single +5.0 V supply.
The temperature transfer function is:
VOUT = (V+/5 V) × [1.375 V +(22.5 mV/°C) × TA]
Power requirements are 5V / 1mA.
The sensor has a 5/16-24 threaded body and is supplied with two nylon mounting washers and a Nyloc fastening nut.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this temperature sensor is STC'd as a primary replacement.
