RAMI AV-1 Base Station | VHF
The AV-1 is a base station antenna for VHF communications with ground vehicles or aircraft. It has heavy-duty construction with 3/8″ diameter aluminum radials and a 1″ diameter aluminum tube radiator. These elements are treated with a “hexavalent free” passivation process per MIL-81706 and MIL-5541 for superior durability. It mounts easily to a 1″ diameter pipe or a 1-1/4″ O.D. tube with locking set screws. A built-in gap-type lighting arrestor is an important design feature. The antenna operates at a frequency of 118 – 137 MHz, and requires no additional tuning. It is designed to withstand wind speeds of up 100 mph.
MY-CO Carbon Monoxide Detector | USB Powered
PROBE-12FT-WHT-C307PS
PROBE-12FT-WHT-C307PS FEATURES Linear Current Output: 1uA/K (AD590KH) Wide Temperature Range: -55°C to 150°C (AD590KH) 2-Terminal Device: Voltage in/current out (AD590KH)
Select options
This product has multiple variants. The options may be chosen on the product page
M811C Digital Clock
M811C FEATURES FAA APPROVED 2 ¼” INTERNAL MOUNT or FRONT MOUNT SIX-DIGIT DISPLAY ON ALL 3 FUNCTIONS LOCAL TIME FLIGHT
Select options
This product has multiple variants. The options may be chosen on the product page
TRIG TA17 VHF Com Antenna
TRIG TN70 GPS Receiver
Fuel Flow Transducer 201B
The Fuel Flow Transducer measures flows of hydrocarbon fuels such as gasoline, kerosene, and #2 diesel fuel and other light transmitting, non-corrosive liquids of similar viscosity. Typical fuel flow applications include aircraft fuel monitoring systems; gasoline, diesel, and gas turbine engine test stands; and industrial furnaces.
The transducers give repeatable signals on gasoline across a 100 to 1 flow range down to 0.3 GPH. The higher viscosity of diesel fuel reduces signal repeatability at flow rates below 2 GPH. Pressure drops are very low compared to other turbine flow transducers. The transducer bearing system is rated for continuous operation at the upper end of the flow range.
The transducers produce a current pulse signal from an opto-electronic pickup with a preamplifier.
G4 Engine Monitor
G4 Engine Monitor Here’s why you should install G4: Leaning: G Series is the best technology available, there’s nothing else like it,
Select options
This product has multiple variants. The options may be chosen on the product page
PT-100GA – Pressure Transducer
P-300M Magnetic Float Sensor
A200-HMB – Bendix Rotational Speed Sensor
The A200-HMB is an Hall Effect rotational speed sensor. It provides a speed accuracy of 1 RPM when used in conjunction with the TM200 instrument.
The output signal is a latched, pulse width modulated square wave output of 0V to a maximum of 30V, proportional to rotational speed.
Power requirements are 3.8V to 30V / 3mA.
Precision machined from 6061 T6 aircraft grade aluminum, this sensor is designed to thread into the vent hole of Bendix unpressurized magnetos.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this speed sensor is STC'd as a primary replacement.
