Instrument Intensity Potentiometer – Rev 2 – 5 Instruments ONLY

NOTE: This item is only required for use on products purchased on or AFTER 03-JAN-2013.

This potentiometer will support up to ten instruments in a single installation. It provides infinitely variable, uniform intensity control for all instruments.

These units are TSO qualified with all 200 Series instruments and is STC’d as a primary replacement instrument component under all flight conditions (day/night VFR and IFR).

Certification / Compliance
TSO (various per instrument)
Canadian STC
FAA STC
Certified as primary replacement

Environmental
DO-160F A1CAASXXXXXXZBXXBBBCSBA1C11XXAX

DC Power Source
Input voltage 6 to 36 VDC
Power consumption 10mA (maximum brightness)
Load dump tolerance +60V
Direct spike tolerance +/- 60V
Cable spike tolerance > +/- 1KV

Operating Temperature
Constant operating -15ºC to +55ºC
Short term operating (1hr) -40ºC to +70ºC
Storage -55ºC to +85ºC

Signal Output
0.0V to Bus Voltage

Dimensions
0.5″ diameter with 1/4″ mounting hole

Weight (including knob)
1.0 oz