Category – Electrical – Batteries
BB-TH-CO Thermal Battery Box “C” Case
Thermal battery box to protect from radiated or convection heat. Compatible with our existing “C” case battery models; ETX680C.
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .375Kg or 13.2oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140 deg F ( 60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
BB-MU Light Weight Battery Box Fit “E” Case And PC680
The light weight aluminum battery box is excellent to use with the EarthX lithium batteries for easy installation. This battery box can be used interchangeably for the EarthX Lithium Battery models ETX680/900/900-VNT/1200 or the Odyssey PC680 with the use of a foam spacers. We call it the multi-use battery box for this reason.
If you are using the battery box for the EarthX Lithium batteries, you will use a foam spacer on the left and right side of the battery for a snug fit. If you are using the battery box for the PC680, you will use the foam spacer on the backside at the bottom of the case to adjust for the tapering of the case for a snug fit.
This battery box was engineered to be strong enough to withstand 30 G of force for the EarthX Lithium Batteries or 15 G of force for the PC680 yet only weighs .275Kg or 10oz. This unique design allows for simple, easy installation with the dimensions: 7.1″ L x 3.1″ W x 6.5-6.6″ (adjustable)H or (180mm x 80mm 166-168mm).
What’s included:
- 1 x battery box
- 1 x top front hold down
- 2 x screws for hold down
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
1/4″ Vent Tubing
Tubing for the EarthX ETX900-VNT or the ETX900-TSO vented batteries. Only EarthX approved or supplied tubing should be used. The tubing is chemical resistant and rated for 500°F. Be careful not to crush or restrict flow through the tubing. Enter the quantity you want in feet.
1/4″ inside diameter, 5/16″ outside diameter
Optimate TM-522-D4 40W (3amp) Solar Battery Charger/Maintainer (12-13.2V Batteries)
ETX680-24-TSO-172-KIT
STC installation kit to be used with the ETX680-24-TSO battery and the corresponding STC. This kit DOES NOT INCLUDE the battery, that is sold separately.
Replaces the Concorde RG24-11M, RG24-15, RG24-16, RG24-10 batteries and the Gill 7025-20, 7025-24, 7242-14, 7242-16, 7243-14, 7243-16 and G-243 with over 20+ pounds weight reduction instantly.
Optimate TM-275 v2 10 amp Battery Charger/Maintainer/Power Supply (12-13.2V Batteries)
This Optimate Lithium charger will quickly charge your battery at 10 amps, maintain it at the optimal voltage, and can be used as a power source of 8 continuous amps! For example, you can use it as power supply while programming your aircraft EFIS so you are not draining your battery while you work.
Cessna ETX900-TSO-25-KIT
Installation kit for the ETX900-TSO battery. This kit DOES NOT INCLUDE the battery. Used for replacing a Concorde or Gill 25 Ah battery.
The picture of the kit is for illustrative purposes.
You may not use all the pieces in the kit;
no left over parts can be returned.
Kits are non-returnable!
Piper ETX900-TSO-25-KIT
Installation kit for the ETX900-TSO battery. This kit DOES NOT INCLUDE the battery. Used for replacing a Concorde or Gill 25 Ah battery.
The picture of the kit is for illustrative purposes.
You may not use all the pieces in the kit;
no left over parts can be returned.
Kits are non-returnable!
Decathlon ETX900-TSO-AC-KIT
Installation kit to be used with the ETX900-TSO battery. This kit DOES NOT include the battery, it is sold separately.
Scout ETX900-TSO-AC-KIT
Installation kit to be used with the ETX900-TSO battery. This kit DOES NOT include the battery, it is sold separately.
Citabria ETX900-TSO-AC-KIT
Installation kit to be used with the ETX900-TSO battery. This kit DOES NOT include the battery, it is sold separately.
Hawker Beechcraft ETX900-TSO-BC-KIT
Approved STC installation kit to be used with the ETX900-TSO battery. This kit DOES NOT include the battery, it is sold separately.
Navion ETX900-TSO-BC-KIT
Approved STC installation kit to be used with the ETX900-TSO battery. This kit DOES NOT include the battery, it is sold separately.
Cub Crafters STC Kit ETX900-TSO-CUB-KIT
Approved STC installation kit to be used with corresponding STC Aircraft approval for CC18-180, CC18-180A, CC19-180 and CC19-215. This kit is for the ETX900-TSO battery. This kit DOES NOT INCLUDE the battery.
The picture of the kit is for illustrative purposes.
You may not use all the pieces in the kit;
no left over parts can be returned.
Kits are non-returnable!
BB-HDB Hold Down Bracket for “E” Case
This is a custom fit designed hold down bracket for floor mounting of the battery for the ETX680, the ETX900, ETX900-VNT , or the ETX1200 battery.
